SA AK-105 буфер (SA-PJ10 PRIME™ BLDC™ ASTER SE V3) – черен
В наличност2 бр. на склад
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
Specna Arms AK-105 Buffer (SA-PJ10 PRIME™ J-Series BLDC™ ASTER SE V3)
Specna Arms AK-105 PRIME™ J-Series ranks among the best-equipped airsoft AK platforms on the market, combining a PRIME™ series steel body with premium internal upgrade parts. The result is a rifle with a highly realistic feel, excellent durability for demanding use and strong performance without the need for further investment. Thanks to the ergonomic polymer handguard and adjustable AR15 stock, you get a modernised AK ready for both CQB and outdoor games. A clever feature is the installation of a lower-profile MAGNUS™ TDC hop-up unit, which leaves enough space under the dust cover for a TITAN 11.1V 3000 mAh Stick Li-Ion battery, which we recommend for this rifle. On the side, there is a Dovetail mounting rail for attaching an AK- or SVD-type side mount (upper). Inside the rifle is a reinforced ORION V3 gearbox fitted with high-quality upgrade parts designed to withstand higher loads. At the heart of the setup is a Dark Matter™ brushless motor running at 27 000 RPM, providing immediate trigger response, a higher rate of fire and lower power consumption. Power is transferred through 16:1 CNC steel gears, while a reinforced polycarbonate piston with 14 metal teeth and a combination of ball bearings and bushings provide an ideal balance between speed and durability. Accuracy is supported by a 6.02 mm precision inner barrel together with a Helium Flat-Hop bucking and MAGNUS™ AK TDC hop-up unit. The GATE ASTER SE V3 electronic unit allows advanced gun configuration, including pre-cocking, binary trigger and DMR mode. Thanks to the Enter&Covert™ QSC system, the spring can also be changed within a few minutes. To replace the spring, the gearbox must be removed from the gun body and the spring guide pulled out.
Key features of the Specna Arms AK-105 Buffer SA-PJ10 PRIME™ rifle
Steel AK PRIME™ J-Series body
The rifle features a steel AK-105 body for maximum durability and realistic weight. The ergonomic handguard and adjustable Bushmaster AR15 stock give the rifle a modern appearance and provide space for accessories.
Dark Matter™ brushless motor
The brushless motor offers significantly better trigger response, a higher rate of fire and lower power consumption than conventional motors. The rifle can fire thousands of shots even with a smaller battery.
GATE ASTER SE V3 ETU
The ASTER SE V3 electronic unit offers features such as binary trigger, active brake, pre-cocking and adjustable firing modes. It also supports powerful 11.1V Li-Po and Li-Ion batteries.
MAGNUS™ AK TDC hop-up
The redesigned MAGNUS™ AK unit with TDC pressure and Flat-Hop bucking provides a stable BB trajectory and significantly improved accuracy at longer ranges.
Space for a TITAN Li-Ion battery
Thanks to the lower-profile hop-up unit, the recommended TITAN 11.1V 3000 mAh Stick Li-Ion battery fits comfortably under the dust cover, offering long battery life and high reliability.
AK PRIME™ airsoft rifle demonstration
Demonstration of the AK PRIME™ J-Series rifle, including its use during gameplay (Source: YouTube GunFire).
Technical specifications
- Manufacturer: Specna Arms
- Platform: AEG AK (J-Series)
- Series: PRIME™ BLDC™
- Model: AK-105 Buffer (SA-PJ10)
- Length: 800–890 mm
- Weight: 3370 g
- Body material: Metal
- Gearbox: Reinforced V3
- Quick spring change: Yes, Enter&Covert™
- Motor: Brushless
- Motor speed: 27 000 RPM
- ETU: GATE ASTER SE V3
- Gears: CNC steel gears 16:1
- Piston head: CNC aluminium with ball bearing
- Cylinder head: CNC aluminium
- Nozzle: CNC aluminium
- Cylinder: CNC stainless steel
- Spring guide: CNC stainless steel with ball bearing
- Piston: Reinforced polycarbonate with 14 CNC steel teeth
- Bearings: 8 mm (J-Cage, 2 ball bearings and 1 bushing on the sector gear)
- Hop-up unit: TDC, rotary (polymer)
- Hop-up bucking: Flat (without protrusion)
- Inner barrel diameter: 6.02 mm
- Inner barrel length: 363 mm
- Muzzle velocity: 130 m/s (1.7 Joule)
- Firing modes: Safe / Semi / Full-auto + programmable ETU modes
- ETU programming: Via the trigger and fire selector (after purchasing the GATE Blu-Link, the CGS app can be used)
- Recommended battery type: Stick
- Recommended battery voltage: Li-Po 11.1 V
- Battery location: Under the dust cover (above the gearbox)
- Connector: T-Dean
- Handguard: Polymer (without mounting rails)
- Side mounting rail: Yes (AK Dovetail)
- Outer barrel thread: 24 mm CW (adapter, clockwise) / 14 mm CCW (counter-clockwise)
- Magazine: S-MAG mid-cap magazine (175 BBs), 2 included
Package contents
- 1× Specna Arms AK-74 M-LOK Carbine AEG rifle (SA-PJ07 PRIME™ J-Series)
- 2× S-MAG mid-cap magazine (175 BBs)
- 1× adapter for batteries with a Small Tamiya connector
- 1× speedloader for mid-cap magazines
- 3× spring (M90, M115, M135)
- 1× Specna Arms stickers
- 1× GATE ASTER SE programming card
- 1× user manual
Warnings
- Springs from some manufacturers are significantly overrated (e.g. an M130 spring may correspond to M140-150 performance) and their actual rating could exceed the declared durability of the gearbox. We recommend using only the included Specna Arms springs. When using springs from other manufacturers, we recommend choosing springs rated M120 to prevent possible damage to the gun caused by a spring that does not correspond to its stated rating.
- When replacing a spring with progressive (non-uniform) winding, make sure that the end of the spring with the tighter winding is positioned on the spring guide, facing outwards from the gearbox.
- Never store the gun with the battery connected.
- Never store the gun with pre-cocking activated. Before storage, always release the piston to its forward position to prevent damage to the spring.
- After installing the weaker M90 spring, do not use an 11.1V Li-Po battery; a less powerful 7.4V battery is more suitable for weaker springs.
Frequently asked questions from our store (FAQ)
Can I control the GATE ASTER SE V3 ETU using a mobile app?
Not without purchasing the GATE Blu-Link separately. Blu-Link is a Bluetooth adapter that enables this functionality. After purchasing the module, download the GATE Control Station (GCS) app for Android or iOS and enable Bluetooth. Then follow the instructions in the app.
Which ammunition (BBs) is ideal for this rifle?
Thanks to the 6.02 mm precision inner barrel and TDC hop-up unit with Flat-Hop bucking, the rifle can handle heavier BBs well. For good accuracy, range and consistent grouping, we recommend high-quality BBs weighing 0.28 to 0.32 g. The ideal weight may vary depending on the rifle's current power and the spring used. We have had good results with BLS PRECISION or EDGE ULTRA™ BBs weighing 0.30 g.
What should I do with the rifle before storing it after an airsoft game?
After the game, always disconnect the battery, as the electronic unit may draw a small amount of power even in standby mode. If you use the Pre-cocking function, release the piston to its forward position before storing the rifle. This prevents the spring from remaining compressed for extended periods and avoids unnecessary stress on the internal components.
Can I install a suppressor with a 14mm CCW thread on the rifle?
Yes. The rifle comes with a 24mm CW adapter installed from the factory for conventional AK compensators and PBS-1 / PBS-4 type suppressors with this thread. If you loosen the locking screw (heating may be required due to threadlocker), the adapter can be unscrewed, revealing a standard 14 mm CCW counter-clockwise thread on the barrel.
Параметри
| Variants | AK-105 Buffer |
|---|---|
| Color | Black |
| Muzzle velocity (m/s) | 130 (m/s) |
| Recommended weight of ammunition | 0,28g - 0,32g |
| Thread (mm) | 14-/24+ (mm) |
| Outer length MINIMAL (mm) | 800 (mm) |
| Outer length MAXIMAL (mm) | 890 (mm) |
| Inner barrel length (mm) | 363 (mm) |
| Weight (g) | 3370 (g) |
| Body/receiver material | Metal |
| Mounting System | None |
| Gearbox version | V3 - QSC |
| Amount of piston teeth | 14 |
| Bearings (mm) | 8 (mm) |
| Bearings (material) | Metal |
| Piston head | Metal |
| Nozzle | Metal |
| Spring guide | Metal |
| Hop-Up chamber material | Plastic |
| Battery type | Stick |
| Connector type | T-Dean |
| Magazine material | Plastic |
| High-cap / Mid-cap | Mid-cap |
| Magazine capacity | 175 |
| Processor unit | YES |
| Battery included | NO |
| Battery Charger | NO |
| Blowback | NO |
| Weapon accessories | Yes |




