CheckpointWest
Количка0
Други AK

SA AK-74U M-LOK Gen2 (SA-J83 CORE™ HAL ETU™) – черен

Марка
Specna Arms
Арт. №
SPARMS311

В наличност3 бр. на склад

196,70 €Цената е с ДДС.
1

  • Доставка: [СРОК]
  • Връщане: [СРОК ЗА ВРЪЩАНЕ]

Описание

Specna Arms AK-74U M-LOK Gen2 (SA-J83 CORE™ HAL ETU™) airsoft rifle

Specna Arms AK-74U CORE™ Gen2 relies on a lightweight yet durable fibreglass-reinforced nylon CORE™ body with a realistic matte finish that can also withstand tougher handling, as it is stronger than cheap metal alloy bodies. The metal outer barrel features a 14mm CCW thread fitted with an adapter with a 24mm CW thread. Steel components such as screws, pins, fire selector lever and dust cover provide strength where it is needed. The result is an extremely lightweight yet robust AEG assault rifle that is easy to handle. The controls of the AK platform correspond to the real firearm. It features a charging handle, fire selector and easy access to the hop-up adjustment through the ejection port. Thanks to the aluminium M-LOK handguard and adjustable AR15 stock, you get a modernised AK ready for both CQB and outdoor games. On the side, there is a Dovetail mounting rail that allows the installation of an AK- or SVD-type side mount (upper). Inside the rifle is a reinforced ORION V3 gearbox fitted with upgraded parts designed to withstand higher loads. The battery is located under the dust cover, so a Stick-type battery is required. Overall, this is a powerful rifle combining low weight, a proven design and excellent Gen2 internal parts in one affordable package. We particularly appreciate the build quality of the CORE™ Gen2 series, as the body feels very durable at first glance while the rifle also comes with powerful internal parts. Accuracy is supported by a 6.03 mm precision inner barrel together with the MAGNUS™ AK TDC unit. The HAL ETU™ electronic unit provides advanced rifle settings such as Binary Trigger, pre-cocking, trigger sensitivity adjustment and Li-Po battery undervoltage protection. Thanks to the Enter&Covert™ QSC system, the spring can also be changed within a few minutes. To replace it, the gearbox must be removed from the rifle body and the spring guide pulled out.

Key features of the Specna Arms AK-74U M-LOK Gen2 (SA-J83)

HAL ETU™ processor unit

Offers advanced features such as Binary Trigger, pre-cocking, trigger sensitivity adjustment and Li-Po battery undervoltage protection.

Lightweight CORE™ series construction

The fibreglass-reinforced nylon body offers low weight and high durability.

6.03 mm precision inner barrel and TDC hop-up unit

They provide improved accuracy and a stable BB trajectory thanks to the TDC pressure system.

ESA™ QSC system and durable ORION V3 gearbox

ESA™ quick spring change without the need to disassemble the rifle. Reinforced ORION gearbox with 8mm bearings and upgrade parts.

Side mounting rail

The side Dovetail rail is designed for attaching an AK / SVD mount or installing a PSO rifle scope or AK red dot sight.

Specna Arms AK CORE™ J-Series showcase

Demonstration of spring replacement, disassembly and operation of the Specna Arms AK J-Series CORE™ rifle (the video shows Gen1 rifles without the upgraded internal parts).

Technical specifications

  • Manufacturer: Specna Arms
  • Platform: AEG AK
  • Series: CORE™
  • Model: AK-74U M-LOK Gen2 (SA-J83)
  • Length: 740–820 mm
  • Weight: 2625 g
  • Body material: Fibreglass-reinforced nylon
  • Gearbox: ORION™ V3
  • Quick spring change: Yes, Enter&Covert™
  • Motor: Brushed
  • ETU unit: HAL ETU™
  • Gears: 16:1 steel gears
  • Piston head: Polymer
  • Cylinder head: Polymer with metal nozzle stem
  • Nozzle: CNC aluminium
  • Cylinder: Stainless steel
  • Spring guide: Polymer with metal base and ball bearing
  • Piston: Polycarbonate with 14 steel teeth
  • Bearings: 8 mm (bushings)
  • Hop-up unit: TDC, rotary (polymer)
  • Hop-up bucking: 60 sh
  • Inner barrel diameter: 6.03 mm
  • Inner barrel length: 300 mm
  • Muzzle velocity: 115 m/s (1.4 Joule)
  • Firing modes: Safe / Semi / Full-auto + programmable ETU modes
  • ETU programming: Manually using the trigger and fire selector
  • Recommended battery type: Stick
  • Recommended battery voltage: Li-Po 11.1 V
  • Battery location: Under the dust cover (above the gearbox)
  • Connector: T-Dean
  • Handguard: M-LOK
  • Side mounting rail: Yes
  • Outer barrel thread: 14 mm CCW (counter-clockwise) / 24 mm CW (clockwise) adapter
  • Magazine: S-MAG hi-cap magazine (430 BBs)

Package contents

  • Specna Arms AK-74U M-LOK Gen2 (SA-J83 CORE™ HAL ETU™)
  • S-MAG hi-cap magazine (430 BBs)
  • M90 spring
  • Specna Arms stickers
  • User manual

Instructions for putting the rifle into operation

Before you can fire the rifle, you must activate the HAL ETU unit and follow this procedure exactly, otherwise the rifle will not respond to the connected battery:

  1. Set the fire selector to Safe.
  2. Connect the battery and wait 3 seconds until you hear a beep.
  3. Press and hold the trigger for 5 seconds until you hear another beep.
  4. The rifle is now ready for use.

Warnings

  • Battery and charger are not included and must be purchased separately.
  • Before first use, the HAL ETU™ unit must be calibrated (see above).
  • Springs from some manufacturers are significantly overrated (e.g. an M130 spring may correspond to M140-150 performance) and their actual power could exceed the declared durability of the gearbox. We recommend using only the included Specna Arms springs. When using springs from other manufacturers, we recommend choosing springs rated M120 to prevent possible damage to the rifle caused by a spring that does not correspond to its stated rating.
  • When replacing a spring with progressive (irregular) winding, make sure that the end of the spring with the tighter coils is positioned on the spring guide, facing outwards from the gearbox.
  • Never store the rifle with the battery connected.
  • Never store the rifle with pre-cocking activated. Before storage, always release the piston to the forward position to prevent damage to the spring.

Frequently asked questions from our store (FAQ)

Which ammunition (BBs) is ideal for this rifle?

Thanks to the 6.03 mm precision inner barrel and TDC hop-up unit with Flat-Hop bucking, the rifle can also handle heavier BBs effectively. For optimum accuracy, range and consistent grouping, we recommend high-quality 0.28 g BBs. The ideal weight may vary depending on the current power of the rifle and the spring used.

What should I do with the rifle before storing it after an airsoft game?

After the game, always disconnect the battery, as the electronic processor unit may draw a minimal amount of power even in standby mode. If you use the Pre-cocking function, release the piston to the forward position before storing the rifle. This prevents the spring from remaining compressed for extended periods and avoids unnecessary stress on the internal parts.

Параметри

Параметри
ColorBlack
Muzzle velocity (m/s)115 (m/s)
Recommended weight of ammunition0,25g - 0,28g
Thread (mm)14- (mm)
Outer length MINIMAL (mm)740 (mm)
Outer length MAXIMAL (mm)820 (mm)
Inner barrel length (mm)300 (mm)
Weight (g)2625 (g)
Body/receiver materialABS / Plastic
Mounting SystemM-LOK
Gearbox versionV3 - QSC
Amount of piston teeth14
Bearings (mm)8 (mm)
Bearings (material)Metal
Piston headPlastic
NozzleMetal
Spring guidePlastic
Hop-Up chamber materialPlastic
Battery typeStick
Connector typeT-Dean
Magazine materialPlastic
High-cap / Mid-capHigh-cap
Magazine capacity430
Processor unitYES
Battery includedNO
Battery ChargerNO
BlowbackNO
Weapon accessoriesYes
02 // Още от сектора

Подобни продукти

Към магазина →