GUARDER Buttstock Switch Assembly – M16 / MP5 / G3
In stock7 in stock
- Delivery: [TIME]
- Returns: [RETURN PERIOD]
Description
GUARDER V2 Wiring With Trigger Contacts for M16 / MP5 / G3
GUARDER Buttstock Switch Assembly GE-07-21 is an incomplete wiring assembly with mechanical trigger contacts designed for Tokyo Marui standard M16, MP5 and G3 AEGs. The wiring uses copper wires with a silver-plated surface, while the trigger contact housing is made of heat-resistant plastic capable of withstanding temperatures up to 200 °C. It is a suitable replacement for damaged wires, worn contacts or when refurbishing the gun's original electrical system. As this version is designed for a rear wiring extension, the wires run from the gearbox toward the stock. The connecting wiring harness with fuse and battery connector is not included and must be purchased separately. During installation, we recommend checking the correct seating of the contacts, wire routing and any points where the insulation could become pinched when closing the gearbox. For higher-performance builds, it is worth adding a MOSFET, which reduces electrical stress and arcing on the mechanical trigger contacts.
Key Features
Incomplete Assembly for V2 Gearbox
The set includes only the wiring with trigger contacts and serves as a replacement for the original electrical wiring inside a V2 AEG gearbox.
Silver-Plated Copper Wires
GUARDER uses copper wires with a silver-plated surface for reliable electrical current transfer between the battery, trigger contacts and motor.
Heat-Resistant Trigger Contacts
The contact housing is made of heat-resistant plastic capable of withstanding temperatures up to 200 °C, designed to withstand the thermal stress generated during operation of the AEG electrical system.
For MP5 / G3 and Other V2 Platforms
The wiring is particularly suitable for corresponding MP5 / G3 models and other AEGs with a V2 gearbox that have the battery stored in the stock.
Not Suitable for M4A1 / CAR15 and XM177 With Handguard Wiring
This version is not designed for M4A1, CAR-15 or XM177E2. GUARDER offers the different GE-07-20 front wiring assembly for these models.
Technical Specifications
- Type: wiring with trigger contacts
- Gearbox type: V2 (rear wiring)
- Wire material: copper with silver-plated surface
- Contact material: copper / heat-resistant plastic
- Heat resistance: up to 200 °C
- Typical compatibility: M16, MP5, G3 and other corresponding AEGs with a V2 gearbox and battery in the stock
- Manufacturer code: GE-07-21
- Product code: GUARD204
Package Contents
- 1× GUARDER central wiring with trigger contacts for V2 gearbox (rear connection)
Frequently Asked Questions (FAQ)
Which Guns Is This Wiring Designed For?
It is designed for corresponding AEGs with a V2 gearbox excluding M4A1, CAR-15 and XM177E2. Typical examples include M16, MP5 or G3 platforms with the battery in the stock. Before purchasing, we recommend comparing the design and routing of the original wiring.
Is the Wiring Suitable for M4 or CAR-15?
No. GUARDER specifically lists this version as excluding M4A1, CAR-15 and XM177E2. The different GE-07-20 front wiring assembly is designed for these models.
Does the Set Also Include Trigger Contacts?
Yes. This is an incomplete assembly of wires and mechanical trigger contacts, making it suitable for replacing worn or damaged contacts as well. However, the extension harness to the stock must be purchased separately.
Is It Worth Adding a MOSFET to the Wiring?
Yes, for higher-performance builds. A MOSFET reduces the current load on the mechanical trigger contacts, helping to reduce arcing and wear.
Specifications
| Variants | M16 / MP5 / G3 |
|---|---|
| Color | Combination |
| Gearbox version | V2 |




