CheckpointWest
Cart0
Trigger switches & wirings

SA Complete Wiring with V2 / M4 Microswitch – Rear (Stock)

Item no.
SPARMS117

In stock27 in stock

€10.90Price includes VAT.
1

  • Delivery: [TIME]
  • Returns: [RETURN PERIOD]

Description

Specna Arms complete V2 / M4 wiring with microswitch

Specna Arms complete wiring with microswitch is a replacement internal part for special V2 AEG gearboxes where switching is handled by a microswitch instead of conventional mechanical trigger contacts. This is a wiring set with rear wiring, meaning that the battery wires are routed into the buffer tube or fixed stock compartment. The main difference compared with standard V2 wiring is that the trigger contacts are replaced by a microswitch. This provides a faster response to a trigger pull, but also requires a suitable design and sufficient space inside the gearbox. The wiring is therefore not designed for standard V2 gearboxes with conventional trigger contacts. Compatibility must be carefully checked before installation. This type of solution can be found, for example, in certain SHS, Lancer Tactical, older G&G Gen 1.0, A&K or CYMA gearboxes. The V2 designation alone is not decisive; the design of the specific gearbox shell and the presence of space for installing the microswitch are the key factors. The wires intended for connecting the motor are terminated with spade connectors. A Small Tamiya connector is used for battery connection. The wiring has a rear configuration and is therefore suitable for setups where the battery is located in the buffer tube, adjustable stock or fixed stock.

Key features of the Specna Arms V2 / M4 wiring

Microswitch operation

Instead of conventional mechanical contacts, the wiring uses a microswitch that provides a faster response to a trigger pull. However, there must be suitable space inside the gearbox for its installation.

Only for special V2 gearboxes

The wiring is designed exclusively for V2 gearboxes adapted for a microswitch. It is not a replacement for conventional contacts in just any standard V2 gearbox.

Rear wiring

The battery wires are routed into the buffer tube or fixed stock. The wiring is therefore designed for configurations with the battery located in the rear section of the AEG.

Spade connectors for the motor

The motor wires are fitted with spade connectors for connection to the motor contacts, so there is no need to prepare their terminals separately.

Small Tamiya connector

For battery connection, the wiring is factory-terminated with a Small Tamiya connector.

Wiring with microswitch for V2 gearbox

For special V2 gearboxes adapted for a microswitch and rear wiring.

Technical specifications

  • Manufacturer: Specna Arms
  • Type: Complete wiring with microswitch
  • Designed for: Special V2 AEG gearboxes with a microswitch mounting space
  • Platform: M4 and other compatible platforms
  • Wiring: Rear, into the buffer tube / fixed stock
  • Switching: Microswitch
  • Motor connection: Spade connectors
  • Battery connector: Small Tamiya
  • Fuse: No
  • Compatibility examples: Certain SHS, Lancer Tactical, older G&G Gen 1.0, A&K and CYMA models

Warning: This wiring is not compatible with every V2 gearbox. The microswitch requires a specially adapted space inside the gearbox shell. Before ordering, always compare the design of the original wiring and gearbox.

Package contents

  • 1× Specna Arms complete V2 / M4 wiring with microswitch and rear wiring

Frequently asked questions from our store

What is the difference between a microswitch and conventional V2 trigger contacts?

In this wiring, the conventional trigger contact assembly is replaced by a microswitch that provides a faster response to a trigger pull. However, the microswitch requires a specially adapted space inside the gearbox.

Does the wiring fit every V2 gearbox?

No. It is designed only for special V2 gearboxes adapted for the use of a microswitch. This system can be found, for example, in certain SHS, Lancer Tactical, older G&G Gen 1.0, A&K or CYMA models.

Where is the battery connector routed?

This is rear wiring. The battery wires are routed into the buffer tube or fixed stock compartment.

What connector is used for the battery?

The wiring is terminated with a Small Tamiya connector. The wires intended for connecting the motor are terminated with spade connectors.

Specifications

Specifications
VariantsMicroswitch (Rear)
Gearbox versionV2 - custom
Connector typeSmall Tamyia
MOSFETNO
Processor unitNO
02 // More from the sector

Similar products

Back to the shop →