AirsoftParts резервен О-пръстен за нозъл
Изчерпан
В момента не може да се поръча.
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
AirsoftParts Replacement Sealing O-Ring for Nozzle
The nozzle sealing O-ring is a small but important part of an AEG air seal system. It is located inside the nozzle and helps seal the connection as the nozzle moves along the cylinder head, preventing unnecessary air loss during firing. Constant nozzle movement mechanically stresses the O-ring and can gradually cause deformation, wear and a subsequent reduction in air seal performance. As part of regular servicing, we recommend replacement approximately every 10,000 BBs fired or once a year, whichever comes first. When replacing it, it is also advisable to check that the nozzle moves freely along the cylinder head without binding.
Key Features
Restores the Nozzle Seal
A new O-ring helps restore the correct seal between the nozzle and cylinder head and reduce unwanted air leakage.
Air Seal System Service Part
The O-ring is designed as a replacement nozzle seal for regular maintenance or troubleshooting reduced air seal performance.
Replacement After 10,000 Shots
For preventive maintenance, we recommend replacing the seal approximately every 10,000 BBs fired, as its condition gradually deteriorates with use.
Annual Maintenance Interval
For less frequently used guns, we recommend replacing the O-ring at least once a year as part of regular air seal system maintenance.
Simple Preventive Maintenance
Regular inspection of this small seal helps maintain correct operation and air seal performance without the need to replace the entire nozzle.
Technical Specifications
- Type: replacement sealing O-ring
- Use: sealing a duralumin nozzle against the cylinder head
- Recommended replacement interval: every 10,000 BBs fired or once a year
Package Contents
- 1× replacement sealing O-ring for a duralumin nozzle
Frequently Asked Questions (FAQ)
What Is the Purpose of the O-Ring Inside the Nozzle?
The O-ring creates a seal between the nozzle and cylinder head. This helps reduce compressed air leakage at the point where the nozzle moves during firing.
How Often Should the Nozzle O-Ring Be Replaced?
We recommend replacement every 10,000 BBs fired or once a year, whichever comes first. With intensive use, it is also advisable to check its condition during every major service.
Why Does the O-Ring Seal Deteriorate Over Time?
The nozzle moves along the cylinder head during every cycle, so the O-ring is repeatedly subjected to mechanical stress and deformation. Gradual wear can reduce its ability to seal correctly.
What Should Be Checked When Replacing the O-Ring?
ANAREUS tip: during servicing, also check the surface of the cylinder head and the free movement of the nozzle. The new seal should slide smoothly along the cylinder head without excessive resistance or binding.
Параметри
| Color | Black |
|---|
Подобни продукти


EPeS комплект O-пръстени за повишаване на налягането в Hop-Up камерата за AEG
В наличност

