AirsoftParts шайби за глава на цилиндър (0,5 mm)
Изчерпан
В момента не може да се поръча.
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
AirsoftParts Cylinder Head Shims
AirsoftParts cylinder head shims are service parts designed to adjust the position of the cylinder head inside the gearbox. Each shim has a thickness of 0.5 mm, and with three pieces included, the amount of spacing can be adapted to the specific setup. The shims are made from stainless steel without any additional surface treatment. When adjusting the spacing, we recommend adding the shims one at a time and checking the correct seating of the cylinder head and alignment of the other air seal components after each change. The spacing must always be adapted to the specific gearbox and components used. The cylinder head must not move inside the gearbox, while both halves of the gearbox shell must still close correctly.
Key Features
Cylinder Head Position Adjustment
The shims allow you to adjust the position of the cylinder head inside the gearbox according to the requirements of the specific setup and components used.
0.5 mm Thickness
Each shim has a precisely defined thickness of 0.5 mm, allowing the cylinder head position to be adjusted in consistent increments.
Three Shims in the Set
The package contains 3 individual shims that can be used separately or combined according to the required spacing.
Stainless Steel
The shims are made from stainless steel without any additional surface treatment.
Practical Part for Gearbox Servicing
The set allows you to fine-tune the air seal system assembly using individual shims without modifying the cylinder head itself.
Technical Specifications
- Model: PODL-HV
- Type: cylinder head shims
- Material: stainless steel
- Surface treatment: none
- Thickness of one shim: 0.5 mm
- Number of shims: 3 pcs
Package Contents
- 3× cylinder head shim – 0.5 mm
Frequently Asked Questions (FAQ)
What Are Cylinder Head Shims Used For?
They are used to adjust the position of the cylinder head inside the gearbox. The number of shims used depends on the specific setup and the required spacing.
Can Multiple Shims Be Used at the Same Time?
Yes. Each shim is 0.5 mm thick, so combining them allows you to create spacing of 0.5 mm, 1.0 mm or 1.5 mm.
How Many Shims Should I Use?
The required number depends on the specific gearbox and components used. Start with one shim and, after assembly, check the correct cylinder head position and operation of the adjoining components. Add another shim only if further adjustment is actually required.
What Material Are the Shims Made From?
The shims are made from stainless steel without any additional surface treatment.
Параметри
| Variants | 0,5 mm |
|---|---|
| Color | Silver |
| Body/receiver material | Metal |
| Počet kusů v balení | 3 |
Подобни продукти




