CheckpointWest
Количка0
Гумички за Hop-Up

AirsoftParts шайби за гумичка за Hop-up

Марка
AirsoftParts
Арт. №
ASPARTS130

В наличност7 бр. на склад

4,15 €Цената е с ДДС.
1

  • Доставка: [СРОК]
  • Връщане: [СРОК ЗА ВРЪЩАНЕ]

Описание

AirsoftParts Hop-Up Bucking Shims

AirsoftParts hop-up bucking shims are designed for precise adjustment of the bucking's longitudinal position inside the hop-up chamber. Individual hop-up buckings can differ in design and sealing lip length, which affects their interaction with the nozzle and BB feeding. If the sealing lips are too short, an air leak between the nozzle and hop-up bucking may occur. If they are too long, they may extend into the feeding area and cause feeding issues. A shim only 0.2 mm thick allows the bucking to be moved inside the chamber in small increments to find the appropriate position for a specific setup. The 9.85 mm outer diameter allows use with most common hop-up chambers. When fine-tuning, we recommend adding one shim at a time and checking the air seal, free nozzle movement and reliable BB feeding after each adjustment.

Key Features

Precise Adjustment in 0.2 mm Increments

Each shim is only 0.2 mm thick, allowing very fine adjustment of the hop-up bucking position inside the chamber.

Helps Resolve Air Seal Issues

Correct bucking adjustment can help eliminate an air leak between the nozzle and hop-up bucking sealing lips caused by incorrect positioning of the components.

Fine-Tuning for Reliable Feeding

The shims also allow the bucking position to be adjusted when its sealing lips interfere with BB feeding inside the hop-up chamber.

Stainless Steel

The shims are made from stainless steel without any additional surface treatment and maintain a precisely defined thickness during installation.

9.85 mm Outer Diameter

The 9.85 mm outer diameter allows the shims to be used with most common hop-up chambers, although the dimensions of the specific setup should always be verified.

Technical Specifications

  • Model: PODL-UP
  • Type: hop-up bucking shims
  • Material: stainless steel
  • Surface finish: none
  • Thickness per shim: 0.2 mm
  • Outer diameter: 9.85 mm
  • Possible adjustment with 3 shims: 0.2 / 0.4 / 0.6 mm

Package Contents

  • 3× hop-up bucking shim – 0.2 mm

Frequently Asked Questions (FAQ)

What Are Hop-Up Bucking Shims Used For?

They are used to finely adjust the position of the hop-up bucking inside the chamber, allowing its sealing lips to be better aligned with the nozzle and feeding mechanism of a specific gun.

How Can I Tell If the Hop-Up Bucking Position Is Causing a Problem?

Incorrect bucking position or sealing lip length can result in an air leak between the nozzle and bucking or BB feeding issues. However, these symptoms can also have other causes, so we recommend checking the entire setup before making adjustments.

How Many Shims Can Be Used at the Same Time?

The package contains three 0.2 mm shims, allowing adjustments of 0.2 mm, 0.4 mm or 0.6 mm. In practice, we recommend starting with one shim and adding more only if necessary based on the result.

Are the Shims Compatible With All Hop-Up Chambers?

The 9.85 mm outer diameter allows use with most hop-up chambers, but universal compatibility cannot be guaranteed due to differences between manufacturers' designs. We recommend checking the dimensions of the specific chamber before installation.

Параметри

Параметри
Variants0.2 mm
ColorSilver
Bearings (material)Metal
Počet kusů v balení3
02 // Още от сектора

Подобни продукти

Към магазина →