CheckpointWest
Количка0
M4 / MK18

SA M4 CQB M-LOK Gen2 (RRA SA-E25 EDGE™ HAL 2 ETU™) – Chaos бронзов

Марка
Specna Arms
Арт. №
SPARMS369-CHB

В наличност4 бр. на склад

326,72 €Цената е с ДДС.
1

  • Доставка: [СРОК]
  • Връщане: [СРОК ЗА ВРЪЩАНЕ]

Описание

Specna Arms M4 CQB M-LOK Gen2 EDGE™ with programmable HAL² ETU™

M4 CQB M-LOK Gen2 (RRA SA-E25 EDGE™ HAL 2 ETU™) by Specna Arms combines the classic look of the legendary M4 with modern EDGE™ Gen2 internal parts. The full-metal body with a durable Nano Coating finish features licensed Rock River Arms (RRA®) markings. The front M-LOK handguard allows the installation of foregrips, weapon lights, laser modules and other accessories, while the removable carry handle preserves the classic military appearance and, once removed, exposes the upper RIS rail for a red dot sight or rifle scope. At the heart of the rifle is a reinforced Æther™ V2 gearbox with 8mm bearings, steel gears, a piston with a full-metal rack and high-quality air-seal components. The HAL² ETU™ electronic unit uses the Hall effect for exceptionally precise trigger detection across up to 500 positions and, via Bluetooth, allows settings to be adjusted using the Specna Link™ mobile app. The player can adjust trigger sensitivity, pre-cocking, SEMI, BINARY, BURST and AUTO modes, burst length or RoF and monitor the status of the gun and battery. Accuracy is provided by a rotary TDC Magnus hop-up unit, Helium™ Flat Hop bucking and a 6.03mm precision inner barrel. The ESA™ system also allows quick replacement of the main spring without disassembling the gearbox. The result is a modern AEG that retains the authentic appearance of a service M4A1 while offering the features of contemporary electronically controlled airsoft rifles. The rifle also comes with a Specna Arms EASY LIPO CHARGER suitable even for complete beginners and a powerful 11.1V Li-Po battery with a capacity of 1000 mAh in a Buffer Stick configuration, which fits inside the buffer tube.

Key features of the Specna Arms M4 CQB M-LOK Gen2 EDGE™

RRA® licence

The full-metal body with Nano Coating finish features licensed Rock River Arms markings. The modern M-LOK handguard is complemented by a retractable stock.

HAL² ETU™ with Bluetooth

The advanced HAL² ETU™ processor unit allows adjustment of trigger sensitivity, pre-cocking, RoF and SEMI, BINARY, BURST or AUTO modes via the Specna Link™ app.

Æther™ V2 gearbox

The reinforced Æther™ shell features 8mm bearings, steel gears, reinforcement in high-stress areas, service openings and the option to check AoE, pre-cocking and the bevel gear.

TDC Magnus and 6.03mm barrel

The rotary Magnus™ TDC hop-up unit, together with the Helium™ Flat Hop bucking and 6.03 mm precision barrel, provides stable BB spin and a consistent flight path.

ESA™ quick spring change

The ESA™ QSC system allows the main spring to be quickly replaced without removing and disassembling the gearbox, making it easier to adjust the power to field limits.

HAL² ETU™ by Specna Arms

Introduction to the features, settings and installation of the HAL² ETU™ electronic unit.

Technical specifications

  • Manufacturer: Specna Arms
  • Licence: Rock River Arms (RRA®)
  • Model: SA-E25 EDGE™ Gen2
  • Platform: M4 / AR15
  • Power source: AEG
  • Material: Aluminium / steel / polymer
  • Surface finish: Nano Coating
  • Length: 690-780 mm
  • Weight: 2440 g
  • Inner barrel length: 235 mm
  • Inner barrel diameter: 6.03 mm
  • Hop-up unit: Rotary TDC Magnus
  • Hop-up bucking: Helium™ Flat Hop
  • Gearbox: Æther™ V2
  • Bearings: 8 mm
  • Processor unit: HAL² ETU™ with Bluetooth
  • Programmable modes: SEMI / BINARY / BURST / AUTO
  • Quick spring change: ESA™
  • Approximate muzzle velocity: 115 m/s (1.32 J)
  • Magazine capacity: 125 BBs
  • Magazine type: Mid-Cap
  • Connector: T-Dean
  • Barrel thread: 14 mm CCW
  • Blowback: No
  • Brushless motor compatibility: No

Package contents

  • Specna Arms M4 CQB M-LOK Gen2 (SA-E25 EDGE™ HAL² ETU™)
  • 2× Mid-Cap magazine (125 BBs)
  • Vertical grip
  • M90 spring
  • BB speedloader
  • T-Dean / Small Tamiya adapter
  • Barrel cleaning rod
  • Specna Arms EASY LIPO CHARGER
  • Specna Arms Li-Pol battery 11.1V 1000 mAh

Recommendations and warnings

  • HAL² ETU™ is not compatible with brushless / BLDC motors. Therefore, do not install a brushless motor in the gun. The manufacturer does not support its use with this electronic unit and it may cause the system to malfunction.
  • The battery and charger are not included in the package and must be purchased separately.
  • Whenever changing the spring, always check the resulting power of the gun with a chronograph and comply with the limits of the specific field or event.
  • When not in use, do not leave the battery connected to the gun.
  • Before first use, the HAL² ETU™ unit must be calibrated.

Important notice before using the gun

Before you can fire the gun, you must activate the HAL² ETU™ unit and follow this procedure exactly; otherwise, the gun will not respond to the connected battery:

  1. Set the fire selector to Safe.
  2. Connect the battery and wait 3 seconds until you hear a beep.
  3. Press and hold the trigger for 5 seconds until you hear another beep.
  4. The gun is now ready to use.

Frequently asked questions (FAQ)

How should I charge the battery correctly?

The battery has a main T-Dean connector (red) and a smaller balance connector (white). First connect the charger to the mains, then connect both the balance connector and the battery's T-Dean connector to the charger, and the charger will charge the battery automatically. Once the battery is fully charged, the charger will safely stop charging and the green indicator light will illuminate. First disconnect the battery from the charger (both connectors), then unplug the charger from the mains. When handling the balance connector, proceed carefully to avoid pulling the wires out of the connector. Pay close attention to polarity on the main T-Dean connector; accidentally connecting (+) and (-) incorrectly may damage the battery or charger.

Can a brushless motor be installed in the gun?

No. HAL² ETU™ does not support brushless / BLDC motors. If you plan to replace the motor, use a compatible conventional brushed AEG motor.

What can be configured via the Specna Link™ app?

Via Bluetooth, you can adjust settings such as trigger sensitivity, pre-cocking, RoF, firing modes and burst length. The app also allows you to save profiles, monitor battery status and display operating and telemetry data from the gun.

Параметри

Параметри
ColorChaos Bronze
Muzzle velocity (m/s)115 (m/s)
Recommended weight of ammunition0,28g - 0,32g
Thread (mm)14- (mm)
Outer length MINIMAL (mm)680 (mm)
Outer length MAXIMAL (mm)770 (mm)
Inner barrel length (mm)250 (mm)
Weight (g)2440 (g)
Body/receiver materialMetal
Mounting SystemM-LOK
Gearbox versionV2 - ESA™
Amount of piston teeth14
Bearings (mm)8 (mm)
Bearings (material)Metal
Piston headPlastic
NozzleMetal
Spring guidePlastic
Hop-Up chamber materialPlastic
Battery typeCrane
Connector typeT-Dean
Magazine materialPlastic
High-cap / Mid-capMid-cap
Magazine capacity125
Processor unitYES
Battery includedYES
Battery ChargerYES
BlowbackNO
02 // Още от сектора

Подобни продукти

Към магазина →