SA Daniel Defense® MK18 10.5" Gen2 (SA-E19 EDGE™ HAL 2 ETU™) – Chaos бронзов
В наличност12 бр. на склад
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
Specna Arms Daniel Defense® MK18 10.5" Gen2 EDGE™ with programmable HAL² ETU™
Daniel Defense® MK18 10.5" Gen2 (SA-E19 EDGE™ HAL 2 ETU™) by Specna Arms combines the classic look of the legendary M4 with modern EDGE™ Gen2 internal parts. The full-metal body with a durable Nano Coating finish features licensed Daniel Defense® markings. The front MK18 RIS handguard allows the installation of foregrips, weapon lights, laser modules and other accessories, while the removable carry handle retains the classic military look and, once removed, exposes the upper RIS rail for a red dot sight or rifle scope. At the heart of the rifle is a reinforced Æther™ V2 gearbox with 8mm bearings, steel gears, a piston with a full-metal rack and quality air-seal components. The HAL² ETU™ electronic unit uses the Hall effect for exceptionally precise trigger detection across up to 500 positions and, via Bluetooth, allows settings to be adjusted through the Specna Link™ mobile app. The player can adjust trigger sensitivity, pre-cocking, SEMI, BINARY, BURST and AUTO modes, burst length or RoF and monitor the status of the rifle and battery. Accuracy is handled by a rotary TDC Magnus hop-up unit, Helium™ Flat Hop bucking and a 6.03mm precision inner barrel. The ESA™ system also allows quick replacement of the main spring without disassembling the gearbox. The result is a modern AEG that retains the authentic look of a service M4A1 while offering the features of contemporary electronically controlled airsoft rifles. The rifle also comes with a Specna Arms EASY LIPO CHARGER suitable even for complete beginners and a powerful 11.1V Li-Po battery with a capacity of 1000 mAh in a Buffer Stick configuration, which fits inside the buffer tube.
Key features of the Specna Arms Daniel Defense® MK18 10.5" Gen2 EDGE™
Daniel Defense® licence
The full-metal body with Nano Coating finish features licensed Daniel Defense® markings. The modern MK18 RIS handguard is complemented by a retractable stock.
HAL² ETU™ with Bluetooth
The advanced HAL² ETU™ processor unit allows adjustment of trigger sensitivity, pre-cocking, RoF and SEMI, BINARY, BURST or AUTO modes through the Specna Link™ app.
Æther™ V2 gearbox
The reinforced Æther™ shell features 8mm bearings, steel gears, reinforcement in high-stress areas, service openings and the ability to check AoE, pre-cocking and the bevel gear.
TDC Magnus and 6.03mm barrel
The rotary Magnus™ TDC hop-up unit, together with the Helium™ Flat Hop bucking and 6.03 mm precision inner barrel, provides stable BB spin and a consistent flight path.
ESA™ quick spring change
The ESA™ QSC system allows the main spring to be changed quickly without removing or disassembling the gearbox, making it easier to adapt the power to field limits.
HAL² ETU™ by Specna Arms
Introduction to the functions, settings and installation of the HAL² ETU™ electronic unit.
Technical specifications
- Manufacturer: Specna Arms
- Licence: Daniel Defense®
- Model: SA-E19 EDGE™ Gen2
- Platform: M4 / AR15
- Drive type: AEG
- Material: Aluminium / steel / polymer
- Finish: Nano Coating
- Length: 690-775 mm
- Weight: 2600 g
- Inner barrel length: 270 mm
- Inner barrel diameter: 6.03 mm
- Hop-up unit: Rotary TDC Magnus
- Hop-up bucking: Helium™ Flat Hop
- Gearbox: Æther™ V2
- Bearings: 8 mm
- Processor unit: HAL² ETU™ with Bluetooth
- Programmable modes: SEMI / BINARY / BURST / AUTO
- Quick spring change: ESA™
- Approximate muzzle velocity: 115 m/s (1.32 J)
- Magazine capacity: 125 BBs
- Magazine type: Mid-Cap
- Connector: T-Dean
- Barrel thread: 14 mm CCW
- Blowback: No
- Brushless motor compatibility: No
Package contents
- Specna Arms Daniel Defense® MK18 10.5" Gen2 (SA-E19 EDGE™ HAL 2 ETU™)
- 2× Mid-Cap magazine (125 BBs)
- Vertical RIS grip
- M90 spring
- BB speedloader
- T-Dean / Small Tamiya adapter
- Barrel cleaning rod
- Specna Arms EASY LIPO CHARGER
- Specna Arms 11.1V 1000 mAh Li-Po battery
Recommendations and warnings
- HAL² ETU™ is not compatible with brushless / BLDC motors. Therefore, do not install a brushless motor in the rifle. Its use with this electronic unit is not supported by the manufacturer and may cause the assembly to malfunction.
- Battery and charger are not included and must be purchased separately.
- Whenever changing the spring, always check the resulting power of the rifle with a chronograph and comply with the limits of the specific field or event.
- When not in use, do not leave the battery connected to the rifle.
- Before first use, the HAL² ETU™ unit must be calibrated.
Important instructions for putting the rifle into operation
Before you can fire the rifle, you must activate the HAL² ETU™ unit and follow this procedure exactly, otherwise the rifle will not respond to the connected battery:
- Set the fire selector to Safe.
- Connect the battery and wait 3 seconds until you hear a beep.
- Press the trigger and hold it for 5 seconds until you hear another beep.
- The rifle is now ready to use.
Frequently asked questions (FAQ)
How should I charge the battery correctly?
The battery has a main T-Dean connector (red) and a smaller balance connector (white). First connect the charger to the mains, then connect both the balance connector and the T-Dean connector from the battery to the charger, and the charger will charge the battery automatically. Once the battery is fully charged, the charger will safely stop charging and the green indicator light will illuminate. First disconnect the battery from the charger (both connectors) and then unplug the charger from the mains. Handle the balance connector carefully to avoid pulling the wires out of the connector. With the main T-Dean connector, pay close attention to polarity; accidentally connecting (+) and (-) can damage the battery or charger.
Can a brushless motor be installed in the rifle?
No. HAL² ETU™ does not support brushless / BLDC motors. If you plan to replace the motor, use a compatible conventional brushed AEG motor.
What can be adjusted through the Specna Link™ app?
Via Bluetooth, you can adjust settings such as trigger sensitivity, pre-cocking, RoF, firing modes and burst length. The app also allows you to save profiles, monitor battery status and display operational and telemetry data from the rifle.
Параметри
| Color | Chaos Bronze |
|---|---|
| Muzzle velocity (m/s) | 115 (m/s) |
| Recommended weight of ammunition | 0,28g - 0,32g |
| Thread (mm) | 14- (mm) |
| Outer length MINIMAL (mm) | 700 (mm) |
| Outer length MAXIMAL (mm) | 780 (mm) |
| Inner barrel length (mm) | 270 (mm) |
| Weight (g) | 2675 (g) |
| Body/receiver material | Metal |
| Mounting System | RIS / Picatinny |
| Gearbox version | V2 - ESA™ |
| Amount of piston teeth | 14 |
| Bearings (mm) | 8 (mm) |
| Bearings (material) | Metal |
| Piston head | Plastic |
| Nozzle | Metal |
| Spring guide | Plastic |
| Hop-Up chamber material | Plastic |
| Battery type | Crane |
| Connector type | T-Dean |
| Magazine material | Plastic |
| High-cap / Mid-cap | Mid-cap |
| Magazine capacity | 125 |
| Processor unit | YES |
| Battery included | YES |
| Battery Charger | YES |
| Blowback | NO |




