SA Colt x Daniel Defense® MK18 10.5" Gen2 (SA-E19 EDGE™ HAL 2 ETU™) – черен
В наличност18 бр. на склад
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
Specna Arms Colt x Daniel Defense® MK18 Gen2 EDGE™ with programmable HAL² ETU™
Colt x Daniel Defense® MK18 10.5" Gen2 (SA-E19 EDGE™) by Specna Arms combines the classic look of the legendary M4A1 with modern EDGE™ Gen.2 internals. The full-metal receiver with durable Nano Coating finish features licensed COLT and M4A1 markings as well as the Rampant Colt logo. The front MK18 RIS handguard features licensed Daniel Defense® markings and allows you to mount foregrips, weapon lights, laser modules and other accessories. The upper RIS rail on the receiver is designed for mounting a red dot sight or rifle scope. At the heart of the rifle is a reinforced Æther™ V2 gearbox with 8 mm bearings, steel gears, a piston with full-metal teeth and a high-quality air seal system. The HAL² ETU™ electronic unit uses the Hall effect for extremely precise trigger detection across up to 500 positions and, via Bluetooth, allows configuration through the Specna Link™ mobile app. Players can adjust trigger sensitivity, pre-cocking, SEMI, BINARY, BURST and AUTO modes, burst length or RoF and monitor the status of both the rifle and battery. Accuracy is supported by the rotary TDC Magnus hop-up chamber, Helium™ Flat Hop bucking and precision 6.03 mm inner barrel. The ESA™ system also allows quick replacement of the main spring without disassembling the gearbox. The result is a modern AEG that retains the authentic appearance of a service-style M4A1 with an MK18 handguard while offering the advanced features of today's electronically controlled airsoft rifles.
Key features of the Specna Arms Colt x Daniel Defense® MK18 Gen2 EDGE™
Licensed Colt M4A1 with Daniel Defense® MK18 handguard
The full-metal receiver with Nano Coating finish features licensed COLT and M4A1 markings and the Rampant Colt logo, while the modern RIS handguard bears licensed Daniel Defense® MK18 markings.
HAL² ETU™ with Bluetooth
The advanced HAL² ETU™ processor unit allows adjustment of trigger sensitivity, pre-cocking, RoF and SEMI, BINARY, BURST or AUTO modes via the Specna Link™ app.
Æther™ V2 gearbox
The reinforced Æther™ gearbox shell features 8 mm bearings, steel gears, reinforced high-stress areas, service openings and the ability to check AoE, pre-cocking and the motor gear.
TDC Magnus and 6.03 mm barrel
The rotary Magnus™ TDC hop-up chamber, together with the Helium™ Flat Hop bucking and precision 6.03 mm barrel, ensures stable BB spin and a consistent flight path.
ESA™ quick spring change
The ESA™ QSC system allows quick replacement of the main spring without removing and disassembling the gearbox, making it easier to adapt the muzzle energy to field limits.
HAL² ETU™ by Specna Arms
Introduction to the features, configuration and installation of the HAL² ETU™ electronic unit.
Technical specifications
- Manufacturer: Specna Arms
- License: Colt / Daniel Defense®
- Model: SA-E19 EDGE™ Gen2
- Platform: M4A1 (MK18)
- Power system: AEG
- Material: Aluminium / steel / polymer
- Surface finish: Nano Coating
- Length: 695–775 mm
- Weight: 2775 g
- Outer barrel length: 10.5"
- Inner barrel length: 270 mm
- Inner barrel diameter: 6.03 mm
- Hop-up chamber: Rotary TDC Magnus
- Hop-up bucking: Helium™ Flat Hop
- Gearbox: Æther™ V2
- Bearings: 8 mm
- Processor unit: HAL² ETU™ with Bluetooth
- Programmable modes: SEMI / BINARY / BURST / AUTO
- Quick spring change: ESA™
- Approximate muzzle velocity: 120 m/s (1.48 J)
- Magazine capacity: 125 BBs
- Magazine type: Mid-cap
- Connector: T-Dean
- Barrel thread: 14 mm CCW
- Blowback: No
- Brushless motor compatibility: No
Package contents
- Specna Arms Colt x Daniel Defense® MK18 10.5" Gen2 (SA-E19 EDGE™ HAL² ETU™)
- 2× mid-cap magazine (125 BBs)
- Vertical RIS grip
- M90 spring
- BB speedloader
- T-Dean / mini Tamiya adapter
- Barrel cleaning rod
Recommendations and warnings
- HAL² ETU™ is not compatible with brushless / BLDC motors. Therefore, do not install a brushless motor in the rifle. Its use with this electronic unit is not supported by the manufacturer and may cause the system to malfunction.
- Battery and charger are not included and must be purchased separately.
- Whenever changing the spring, always verify the resulting muzzle energy with a chronograph and comply with the limits of the specific field or event.
- When not in use, do not leave the battery connected to the rifle.
- Before first use, the HAL² ETU™ unit must be calibrated.
Important instructions before using the rifle
To fire the rifle, you must activate the HAL² ETU™ unit and follow this procedure exactly; otherwise, the rifle will not respond to the connected battery:
- Set the fire selector to Safe.
- Connect the battery and wait 3 seconds until you hear a beep.
- Press and hold the trigger for 5 seconds until you hear another beep.
- The rifle is now ready for use.
Frequently asked questions (FAQ)
Can a brushless motor be installed in the rifle?
No. HAL² ETU™ does not support brushless / BLDC motors. If you plan to replace the motor, use a compatible conventional brushed AEG motor.
What can be configured through the Specna Link™ app?
Via Bluetooth, you can configure settings such as trigger sensitivity, pre-cocking, RoF, firing modes and burst length. The app also allows you to save profiles, monitor battery status and view operational and telemetry data from the rifle.
Параметри
| Color | Black |
|---|---|
| Muzzle velocity (m/s) | 120 (m/s) |
| Recommended weight of ammunition | 0,25g - 0,28g |
| Thread (mm) | 14- (mm) |
| Outer length MINIMAL (mm) | 695 (mm) |
| Outer length MAXIMAL (mm) | 775 (mm) |
| Inner barrel length (mm) | 270 (mm) |
| Weight (g) | 2780 (g) |
| Body/receiver material | Metal |
| Mounting System | RIS / Picatinny |
| Gearbox version | V2 - ESA™ |
| Amount of piston teeth | 14 |
| Bearings (mm) | 8 (mm) |
| Bearings (material) | Metal |
| Piston head | Plastic |
| Nozzle | Metal |
| Spring guide | Plastic |
| Hop-Up chamber material | Plastic |
| Battery type | Buffer stick |
| Connector type | T-Dean |
| Magazine material | Plastic |
| High-cap / Mid-cap | Mid-cap |
| Magazine capacity | 125 |
| Processor unit | YES |
| Battery included | NO |
| Battery Charger | NO |
| Blowback | NO |




