SA ÆTHER™ V2 сглобен гиърбокс HAL™ ETU (8 mm) – черен
В наличност15 бр. на склад
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
Specna Arms complete ÆTHER™ V2 gearbox with HAL™ ETU
Complete ÆTHER™ V2 gearbox from Specna Arms provides a premium base for powerful electric M4 / AR15 platform airsoft guns. It is based on the reinforced patented shell used in the PRIME™ series and combines it with a complete set of upgraded internal parts and the electronic HAL™ ETU. The result is a ready-to-use assembly designed for high mechanical loads, fast trigger response and advanced electronic functions. At its core is the reinforced ÆTHER™ V2 shell, designed for powerful builds and strong springs up to M135 (inclusive). Inside are CNC-machined steel gears with a 16:1 ratio, supported by combined 8mm J-Cage bearings. As with the standalone ÆTHER™ shell, ball bearings are used for the bevel and sector gears, while the spur gear uses a durable bushing. This design combines smooth gear operation with durable support in areas exposed to high mechanical loads. The mechanical components are complemented by a polycarbonate piston with 14 metal teeth, CNC aluminium piston head, CNC aluminium cylinder head with double sealing, stainless steel ribbed cylinder and CNC aluminium nozzle. The shell also features an inspection window for checking AOE and other design features known from the ÆTHER™ platform. Fire control is handled by the HAL™ ETU, which uses Hall sensors. The unit allows adjustment of 5 trigger sensitivity levels, 6 pre-cocking levels, active brake, Binary Trigger, AUG mode, Sniper Delay and 3- or 5-round burst. Its functions also include a battery status warning and support for compatible brushless motors. The wiring is routed to the stock with a T-Dean connector, and the assembly is suitable for 11.1V Li-Pol batteries. Power can be changed using the ESA2™ QSC system, which allows quick replacement of the main spring without completely disassembling the gearbox. The complete ÆTHER™ therefore combines a reinforced shell, upgraded internal parts, modern electronics and easy power adjustment in one ready-to-install assembly.
Key features of the complete Specna Arms ÆTHER™ V2 gearbox
Patented ÆTHER™ V2 shell
The reinforced V2 gearbox design with European patent No. 015044865-0001 provides a durable base for powerful M4 / AR15 platform AEG builds.
CNC steel 16:1 gears
CNC-machined steel gears with a 16:1 ratio are designed to combine fast response, RoF and mechanical durability.
8mm J-Cage bearings
Ball bearings for the bevel and sector gears are complemented by a bushing for the spur gear. The combined J-Cage support system combines smooth operation with high mechanical durability.
HAL™ ETU and advanced modes
The electronic HAL™ ETU uses Hall sensors and offers active brake, 6 pre-cocking levels, 5 trigger sensitivity levels, Binary, AUG, Sniper Delay and 3/5-round burst modes.
Complete upgrade assembly
A polycarbonate piston with 14 metal teeth, CNC air-seal components, 16:1 gears and support for compatible brushless motors create a complete base for a powerful AEG build.
HAL™ ETU instructions
Instructions for using and programming the HAL™ ETU.
Technical specifications
- Manufacturer: Specna Arms
- Model: ÆTHER™
- Type: Complete gearbox
- Version: V2
- Designed for: AEG
- Platform: M4 / AR15
- Shell construction: Patented reinforced design
- European patent: 015044865-0001
- Spring change system: QSC ESA2™
- Gears: CNC steel
- Gear ratio: 16:1
- Bearings: 8 mm J-Cage
- Bevel gear support: Ball bearing
- Spur gear support: Bushing
- Sector gear support: Ball bearing
- Piston: Polycarbonate, 14 metal teeth
- Piston head: CNC aluminium
- Cylinder head: CNC aluminium, double sealing
- Cylinder: Stainless steel, ribbed
- Nozzle: CNC aluminium
- AOE inspection: Yes, inspection window
- Electronic unit: HAL™ ETU
- Trigger detection: Hall sensors
- Trigger sensitivity: 5 levels
- Pre-cocking: 6 levels
- Active brake: Yes
- SEMI modes: Semi, Binary, AUG, Sniper Delay
- AUTO modes: Auto, 3-round burst, 5-round burst
- Brushless motor support: Yes
- Suitable battery: 11.1V Li-Pol
- Connector: T-Dean
- Wiring: Rear
- Colour: Black
- Weight: 525 g
Package contents
- 1× complete Specna Arms ÆTHER™ V2 gearbox
- 1× HAL™ ETU electronic unit (installed)
- 1× selector plate
Important instructions before using the gun
To fire the gun, the HAL ETU must be activated by following this procedure exactly; otherwise, the gun will not respond to the connected battery:
- Set the fire selector to Safe
- Connect the battery and wait 3 seconds until you hear a beep.
- Press and hold the trigger for 5 seconds until you hear another beep.
- The gun is now ready to use.
Frequently asked questions from our store
How does the complete ÆTHER™ V2 differ from the standalone shell?
This version is a fully assembled gearbox ready for installation in the gun. In addition to the reinforced ÆTHER™ shell, it includes 16:1 gears, a piston assembly, air-seal components, HAL™ ETU and other necessary internal parts. The standalone shell, on the other hand, is intended for building a gearbox using your own parts.
What bearings does the ÆTHER™ gearbox use?
It uses combined 8mm J-Cage bearings. The bevel and sector gears run on ball bearings, while the spur gear is supported by a bushing to increase durability at this point in the gear train.
What functions does the HAL™ ETU offer?
Among other functions, the HAL™ ETU offers 5 trigger sensitivity levels, 6 pre-cocking levels, active brake, Binary Trigger, AUG mode, Sniper Delay and programmable 3- or 5-round bursts. The unit uses Hall sensors for trigger detection.
Can a brushless motor be used with the gearbox?
Yes. The HAL™ ETU supports compatible brushless motors, such as designs used in Dark Matter or Warhead motors. When building the setup, it is always necessary to choose a motor that matches the gears, spring, power supply and desired behaviour of the entire assembly.
The gearbox does not respond after connecting the battery. What should I do?
When putting the assembly into operation, the HAL ETU™ activation procedure must be followed. Set the fire selector to SAFE, connect the battery and wait approximately 3 seconds for the audible signal. Then press and hold the trigger for approximately 5 seconds until you hear another beep. The unit is then ready for use. It is important to follow this procedure; otherwise, the gun may not respond after the battery is connected.
Параметри
| Variants | ÆTHER™ V2 HAL™ ETU |
|---|---|
| Color | Black |
| Weight (g) | 530 (g) |
| Body/receiver material | Metal |
| Gearbox version | V2 - ESA2™ |
| Amount of piston teeth | 14 |
| Bearings (mm) | 8 (mm) |
| Bearings (material) | Metal |
| Piston head | Metal |
| Nozzle | Metal |
| Spring guide | Metal |
| Connector type | T-Dean |
| Processor unit | YES |
| Battery included | NO |
| Battery Charger | NO |
| Blowback | NO |



