OLIGHT ORL-121 Osight R RIS монтаж, T1 / T2 Footprint – 1.21" (нисък)
В наличност4 бр. на склад
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
OLIGHT 1.21" low RIS mount
OLIGHT ORL-121 is a low-profile mount designed for attaching the OLIGHT Osight R red dot sight to a standard Picatinny / RIS rail. Compared with the 1.535" ORS-153 mount supplied with the red dot sight, the ORL-121 allows the sight to sit lower. With the Osight R installed, the optical axis is positioned 1.21" (30.7 mm) above the mounting rail. The mount uses the Micro T1 / T2 interface. The red dot sight is attached to the top of the mount using the four supplied M3 screws, while the mount itself is secured to the RIS rail by a steel clamp and M5 screw. Thanks to its low profile, it is suitable for setups where the lowest possible optical axis above the gun is required. The body is made from 6061 aircraft-grade aluminium with Type III hard anodising. The load-bearing rail attachment uses a steel clamp. The entire mount weighs only 39 g, measures 63 × 36 × 12 mm and is rated by the manufacturer to withstand loads of up to 1000 G. In addition to the OLIGHT Osight R, the mount is also suitable for dimensionally compatible Vector Optics red dot sights with the RUM™ footprint, including models from the MAVERICK series.
Key features of the OLIGHT ORL-121 mount
Low 1.21" height
With the Osight R installed, the optical axis is positioned 1.21" (30.7 mm) above the Picatinny rail. The mount is suitable for setups requiring a low optic position.
Micro T1 / T2 footprint
The mount is designed for the OLIGHT Osight R and uses the widely adopted Aimpoint Micro T1 / T2 footprint. It is also compatible with suitable Vector Optics RUM™ red dot sights, including models from the MAVERICK series.
Picatinny / RIS mounting
A steel clamp and M5 screw provide secure attachment to a standard Picatinny / RIS rail. The red dot sight is attached to the mount using four M3 screws.
6061 aluminium and steel clamp
The 6061 aircraft-grade aluminium body with Type III hard anodising is complemented by a steel clamp at the rail attachment point. The mount weighs only 39 g.
Resistance up to 1000 G
The compact construction is tested for resistance up to 1000 G. The specified screw tightening torques must be observed for correct and secure installation.
Low mount for Osight R
Low-profile mount positioning the Osight R optical axis 1.21" above the RIS rail, shown mounted on an M249 machine gun.
Installation and recommended tightening torques
- Attach the Osight R red dot sight to the ORL-121 mount using the four supplied M3 screws. The manufacturer specifies a maximum tightening torque of 12 in-lb per screw. Do not exceed this torque.
- Then position the mount at the desired location on the RIS rail and secure it using the M5 screw of the steel clamp. The maximum specified tightening torque for the M5 screw is 43 in-lb. Observing the specified torque helps ensure secure attachment without unnecessarily overloading the threads and mounting components.
- Warning: Do not disassemble the mount or expose it to temperatures above 70 °C, salt water or corrosive liquids. Keep small mounting components out of reach of children. The manufacturer states that wear caused by use in salt water is not covered by the warranty.
Technical specifications
- Manufacturer: OLIGHT
- Model: ORL-121
- Type: Low-profile red dot sight mount
- Designed for: OLIGHT Osight R and compatible red dot sights
- Footprint: Micro T1 / T2
- Compatible footprint: Vector Optics RUM™ (for dimensionally compatible models)
- Gun mounting: Picatinny / RIS
- Optical axis height: 1.21" (30.7 mm) above the rail with Osight R installed
- Body material: 6061 aircraft-grade aluminium
- Finish: Type III hard anodising
- Clamp: Steel
- Dimensions: 63 × 36 × 12 mm
- Weight: 39 g
- Load resistance: 1000 G
- Max. M3 tightening torque: 12 in-lb
- Max. M5 tightening torque: 43 in-lb
- Colour: Matt black
Package contents
- 1× OLIGHT ORL-121 RIS mount
- 1× T10 L-shaped Torx key
- 1× T25 L-shaped Torx key
- 4× M3 screw
Frequently asked questions from our store
How high will the Osight R sit on the ORL-121 mount?
With the OLIGHT Osight R installed, its optical axis is positioned 1.21" (30.7 mm) above the RIS rail. This is therefore the low-profile mount option.
How does the ORL-121 differ from the mount supplied with the Osight R?
The Osight R is supplied as standard with the 1.535" ORS-153 mount for Lower 1/3 Co-Witness. The ORL-121 lowers the optical axis to 1.21", making it suitable where you need the red dot sight to sit closer to the rail.
Is the mount compatible with Vector Optics red dot sights?
Yes, for models with the corresponding RUM™ footprint. It can be used, for example, with compatible Vector Optics MAVERICK series red dot sights. We recommend checking the footprint of the specific model before installation.
How tightly should I tighten the screws?
Tighten the four M3 screws securing the red dot sight to a maximum of 12 in-lb. The M5 screw securing the mount to the RIS rail has a maximum specified torque of 43 in-lb. The manufacturer does not recommend a higher tightening torque.
Параметри
| Variants | 1.21" (Low) |
|---|---|
| Color | Black |
| Body/receiver material | Metal |
| Mounting System | RIS / Picatinny |
| Footprint | RUM |




