GUARDER гумичка за Hop-Up, 70 shore – черен
Изчерпан
В момента не може да се поръча.
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
GUARDER Hop-Up Bucking
GUARDER hop-up bucking with a hardness of 70 sh is designed primarily for higher-powered AEG setups where higher BB velocity requires corresponding hop-up system characteristics. The harder material deforms less under pressure and is suitable for use with springs of approximately M130 to M170. When correctly installed, the bucking also provides a seal between the nozzle and inner barrel and applies the required backspin to the BBs through its contact patch. A hardness of 70° does not automatically mean better results in every gun – in practice, it is important to match the bucking to the performance of the setup, the weight of the BBs used, the pressure, hop-up unit and inner barrel. During installation, we recommend carefully degreasing the contact surface inside the barrel and checking the correct orientation and seating of the bucking. A hop-up nub is also included in the package.
Key Features
70 Shore Hardness
The harder 70 sh version is particularly suitable for higher-powered AEG setups, where it provides firmer and less compliant pressure on the BBs.
For M130–M170 Springs
We recommend the bucking primarily for setups with springs of approximately M130 to M170. Final suitability also depends on the other components of the hop-up and air seal systems.
Consistent Pressure on BBs
At higher power levels, the harder material helps maintain consistent pressure transfer to the BBs and create the required backspin for their flight.
Replacement Part for AEGs
The bucking is designed as a replacement or upgrade component for AEG hop-up systems. Before installation, it is advisable to verify dimensional compatibility with the specific unit and barrel.
Hop-Up Nub Included
Along with the hop-up bucking, you also receive a hop-up nub that transfers pressure from the hop-up unit arm to the bucking.
Technical Specifications
- Type: hop-up bucking for AEG
- Hardness: 70 shore
- Color: black
- Recommended springs: M130–M170
- Compatibility: AEG hop-up systems of the corresponding standard
- Hop-up nub: included
Package Contents
- 1× GUARDER 70 sh hop-up bucking
- 1× hop-up nub
Frequently Asked Questions (FAQ)
What Performance Level Is a 70 Shore Hop-Up Bucking Suitable For?
We recommend this harder version primarily for higher-powered AEGs with springs of approximately M130 to M170. However, the spring rating alone is not the only criterion – muzzle energy, BB weight and the design of the entire hop-up system are also important.
Is a Harder Hop-Up Bucking Always Better?
No. The bucking hardness should be selected according to the specific setup. A bucking that is too hard for a lower-powered gun may require more pressure and may not provide the optimal hop-up effect.
Is a Hop-Up Nub Included?
Yes. The package contains both the hop-up bucking and a hop-up nub, which transfers pressure from the hop-up unit arm to the bucking.
What Should You Check During Installation?
During installation, we recommend checking the correct orientation of the bucking, its seating on the inner barrel and the cleanliness of the contact surface. Oil or grease on the contact surface can significantly reduce friction between the bucking and BBs, thereby impairing the function of the hop-up system.
Параметри
| Variants | 50 sh (AEG) |
|---|---|
| Color | Black |
Подобни продукти

RetroArms INOX дистанционер-шайба за ръб на гумичка за Hop-Up (5 бр.)
В наличност

Гумичка за Hop-Up 70° за AEG, изключително за цев Poseidon Pegasus
В наличност
