CheckpointWest
Количка0
Външни части на механизма

AirsoftParts дуралуминиева подпора на гиърбокс V2 / M4 AEG

Марка
AirsoftParts
Арт. №
ASPARTS001

В наличност2 бр. на склад

23,03 €Цената е с ДДС.
1

  • Доставка: [СРОК]
  • Връщане: [СРОК ЗА ВРЪЩАНЕ]

Описание

AirsoftParts Duralumin V2 Gearbox Brace for M4 AEGs

AirsoftParts duralumin gearbox brace is a reinforcement component designed for M4-type AEGs that is installed between the gearbox and the receiver. Its purpose is to provide additional support for the gearbox and help distribute mechanical stress generated during firing, reducing the risk of the gearbox shell cracking. The brace uses adjustable sliding pins whose position can be adapted during installation to the space between the gearbox and receiver and then secured with locking screws. The design allows wiring to be routed towards the handguard, which is important for guns with front-wired configurations. The duralumin construction offers high durability at a reasonable weight, while the plastic nut further helps reduce the overall weight of the component. Due to differences in design and manufacturing tolerances between individual M4 models, unconditional compatibility with every model should not be assumed without possible fitting.

Key Features

Additional Gearbox Support

The brace is positioned between the gearbox and the receiver, where it helps distribute mechanical stress and reduce the risk of the gearbox shell cracking during firing.

Adjustable Sliding Pins

A pair of sliding pins allows the brace to be adjusted to the specific gun configuration. Once adjusted, their position can be securely fixed using locking screws.

Durable Duralumin Construction

The duralumin construction combines strength with low weight, allowing the brace to provide mechanical support without unnecessarily increasing the weight of the build.

Space for Wiring

The brace design allows wiring to be easily routed into the handguard, making it suitable for configurations with the battery and wiring located in the front of the gun.

Adjustment to the Individual Gun

The position of the sliding pins can be adjusted during installation according to the actual space between the gearbox and receiver, making it easier to adapt the brace to a specific M4 build.

Technical Specifications

  • Type: Gearbox brace
  • Brace Material: Duralumin
  • Nut Material: Plastic
  • Compatibility: M4-type AEGs
  • Position: Between the gearbox and receiver
  • Adjustment: Sliding pins with locking mechanism
  • Wiring: Allows wiring to be routed into the handguard

Package Contents

  • 1× gearbox brace
  • 2× sliding pin
  • 2× spring
  • 2× small hex screw
  • 2× large hex screw
  • 1× small hex key
  • 1× large hex key

Frequently Asked Questions (FAQ)

What Is the Gearbox Brace For?

The brace provides additional support between the gearbox and the receiver. This helps distribute mechanical stress during firing and reduce the risk of the gearbox shell cracking.

How Is the Gearbox Brace Adjusted?

First loosen the retaining screws so that the sliding pins can move freely. Insert the brace between the gearbox and receiver and tighten the retaining screws to determine the required pin position. Then remove the brace, tighten the locking screws, loosen the retaining screws again and reinstall the brace in the gun.

Can Wiring Be Routed Into the Handguard With the Brace Installed?

Yes. The design allows wiring to be routed towards the handguard, so it does not interfere with standard front wiring on compatible builds.

Is the Brace Compatible With All M4 AEGs?

The brace is designed for M4-type AEGs, and the adjustable pins allow it to be adapted to a specific build. However, due to differences in design and manufacturing tolerances between manufacturers, installation without additional fitting cannot be guaranteed for every model.

Параметри

Параметри
ColorBlack
Body/receiver materialMetal
Gearbox versionV2
02 // Още от сектора

Подобни продукти

Към магазина →