EPeS EAR-10 CNC (SR-25 DMR) SMR 15.3" AEG - GENERAL - черен
В наличност1 бр. на склад
Това е всичко налично.
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
EPeS EAR-10 AEG – Ultimate DMR Rifle for Demanding Players
Looking for the most durable body on the market for your DMR rifle? Want precisely fitted aluminum body parts and at the same time low weight? Do you want to buy a fully upgraded gun that has been carefully hand-tested and fine-tuned for maximum performance, accuracy, grouping and longevity? Do you want a semi-auto sniper rifle that the enemy team will complain about endlessly? The EAR-10 with 15.3" SMR handguard is built on a CNC SR-25 body made from a single block of 7075 T6 aircraft aluminum by Retro Arms, reinforced with an almost indestructible CNC V2.5 gearbox shell with QSC spring quick-change system, also by Retro Arms, perfectly centered in the body.
Thanks to the ETU processor unit Perun V2 Hybrid PRO, you can adjust fire modes, set battery protection and pre-cocking. Power is provided by EPeS airsoft pneumatic set and precision CNC MAXX M4A-PRO hop-up chamber with TDC pressure, fitted with a Maple Leaf precision barrel 6.02 mm, with machined grooves for centering rings eliminating barrel vibrations, and a Super Macaron 60sh bucking for absolute accuracy, grouping and unbeatable range. Inside the piston is a spacer adapter, allowing the use of standard AEG springs instead of PSG type, so you can tune the power from 110 to 180 m/s; the gun comes with a Guarder M140 spring installed. Fast trigger response is ensured by Solink CNC SR-25 gears with 18:1 ratio and Short-Stroke modification 16:1 on the piston gear, driven by the brushless motor Solink PRO 34k with long shaft.
In short, this rifle combines the strongest body with premium externals, filled with hand-tuned top internal parts, assembled like a perfect puzzle so each part pushes performance further. The result is a brutally durable yet lightweight sniper rifle, shooting further, more accurately and more successfully than any enemy sniper, so you’ll likely face complaints that your DMR is unfair.
Key Features
- Full CNC:
Retro Arms CNC SR-25 body from 7075 T6 aircraft aluminum – top durability, precise fit, low weight.
- Internal VIP feast:
CNC Retro Arms V2.5 gearbox, Solink gears, Retro Arms piston and bearings.
- Electronics:
Perun V2 Hybrid PRO – firing mode setup, battery monitoring, pre-cocking, T-Dean connector in stock tube.
- Pneumatics:
Complete EPeS set – nozzle, cylinder head, piston head, AoE tuned, Maple Leaf bucking.
- Accuracy and stability:
Maple Leaf 6.02 mm barrel with centering rings, CNC MAXX M4A-PRO hop-up chamber.
- Brushless motor:
Solink PRO 34k high-torque brushless motor.
- Premium quality:
Hand tuned and tested by EPeS Custom, ideal DMR configuration.
Technical Specifications
- Configuration: GENERAL
- Power type: AEG
- Body material: CNC 7075 T6 aluminum
- Dimensions: 860 / 940 mm
- Weight: 2.45 kg
- Color: Black
- Handguard: SMR 15.3" (aluminum)
- Inner barrel length: 430 mm
- Hop-up: CNC MAXX M4A-PRO (TDC pressure)
- Motor: Brushless Solink PRO 34k
- Control unit: Perun V2 Hybrid PRO
- Fire modes: Semi, Full Auto, Binary, Pre-Cocking, others
- Gear ratio: 18:1 / 16:1 Solink
- Bearings: 8 mm bushings
- Spring type: Standard AEG springs (PSG / SR25 springs not compatible)
- Magazine capacity: 120 BBs
- Magazine material: Metal
- Magazine type: Mid-cap
- Thread: 14 mm CCW
- Recommended battery: 11.1V Li-Po (not included)
- Connector: T-Dean (in buffer tube)
- Battery type: Buffer Stick
Package Contents
- EPeS EAR-10 SMR 15.3" AEG
- SR-25 mid-cap magazine (120 BBs)
- Flip-up sights
- M-LOK grip
- EPeS transport case (Medium)
Recommendations & Warnings:
- When replacing a spring with progressive (uneven) coils, ensure the tighter coil end is on the spring guide facing outward from the gearbox.
- Never store the gun with the battery connected.
- Never store the gun with pre-cocking engaged. Always release the piston forward before storage to prevent spring damage.
- A speedloader is required to fill the mid-cap magazine.
- The gun is compatible with most SR25 / AR-10 type magazines on the market, including CYMA and Silverback MDR-X.
- PTS EPM-LR magazines fit tighter but feed reliably.
Параметри
| Color | Black |
|---|---|
| Muzzle velocity (m/s) | 160 (m/s) |
| Recommended weight of ammunition | 0,32g - 0,40g |
| Thread (mm) | 14- (mm) |
| Outer length MINIMAL (mm) | 860 (mm) |
| Outer length MAXIMAL (mm) | 940 (mm) |
| Inner barrel length (mm) | 430 (mm) |
| Weight (g) | 2450 (g) |
| Body/receiver material | Metal |
| Mounting System | SMR |
| Gearbox version | V2.5 - QSC |
| Amount of piston teeth | 17,5 |
| Bearings (mm) | 8 (mm) |
| Bearings (material) | Metal |
| Piston head | Metal |
| Nozzle | Metal |
| Spring guide | Metal |
| Hop-Up chamber material | Metal |
| Battery type | Buffer stick |
| Connector type | T-Dean |
| Magazine material | Metal |
| High-cap / Mid-cap | Mid-cap |
| Magazine capacity | 120 |
| Processor unit | YES |
| Battery included | NO |
| Battery Charger | NO |
| Blowback | NO |
| Weapon accessories | Yes |

