CheckpointWest
Количка0
Плочки за превключвател

GUARDER M4 / AEG V2 пластина на превключвател

Марка
GUARDER
Арт. №
GUARD201

В наличност3 бр. на склад

9,23 €Цената е с ДДС.
1

  • Доставка: [СРОК]
  • Връщане: [СРОК ЗА ВРЪЩАНЕ]

Описание

GUARDER Switch Trolley for M4 / AR15 – AEG V2

GUARDER switch trolley is a replacement part for the electrical trigger mechanism of V2 AEG gearboxes found, for example, in M4 / M16 rifles and other structurally compatible models. When the trigger is pulled, the trolley moves and its copper contacts close the electrical circuit between the battery and motor. The body is made from heat-resistant plastic that withstands temperatures of up to approximately 200 °C. Higher heat resistance is particularly useful around the contacts, where heat and electrical arcing occur when switching current. When replacing the trolley, we also recommend checking the condition of the fixed contacts, wiring and free movement of the entire trigger mechanism. Heavily burnt contacts increase electrical resistance and can cause further problems. The trolley is designed for conventional mechanical switching in V2 AEGs and is not a replacement for electronic trigger units.

Key Features

For V2 Gearboxes

The trolley is designed for the conventional electrical trigger mechanism of a V2 AEG gearbox, used in many M4 / M16 rifles and other compatible models.

Copper Contacts

The copper conductive parts close the electrical circuit when the trigger is pulled, allowing current to flow from the battery to the motor.

Heat-Resistant Plastic

The trolley body is made from Anti-Heat plastic with heat resistance of up to approximately 200 °C, allowing it to better withstand thermal stress around the electrical contacts.

Replacement Trigger Mechanism Part

The trolley is suitable for replacing a worn, burnt or mechanically damaged original part in a compatible V2 gearbox.

For M4 / M16 and Other V2 Platforms

The part is suitable for compatible M4 / M16 AEGs and other guns with a compatible V2 mechanical trigger mechanism. For individual manufacturers, we recommend checking that the original trolley uses the same design.

Technical Specifications

  • Type: electrical trigger contact trolley
  • Contact material: copper
  • Body material: heat-resistant plastic (Anti-Heat Plastic)
  • Heat resistance: up to approximately 200 °C
  • Gearbox version: V2
  • Platform: AEG M4 / M16 and other compatible V2 platforms
  • Trigger system: conventional mechanical contacts

Package Contents

  • 1× GUARDER switch trolley for M4 / AR15 – AEG V2

Frequently Asked Questions (FAQ)

What Is the Purpose of the Switch Trolley in a V2 Gearbox?

The trolley responds to trigger movement and closes the electrical circuit between the battery and motor. Once the contacts are closed, current powers the motor and sets the gearbox gears in motion.

Is the Trolley Suitable for All M4 / M16 AEGs?

It is designed for guns with a compatible V2 gearbox and conventional mechanical trigger contacts. Some modern AEGs use an electronic trigger unit or a different design, so we recommend comparing the original part before replacement.

Why Is the Trolley Body Made From Heat-Resistant Plastic?

When switching current, the contacts heat up and electrical arcing can occur between them. Heat-resistant plastic withstands the heat generated in this part of the trigger mechanism better, and this part is rated for temperatures of up to approximately 200 °C.

What Do We Recommend Checking When Replacing the Trolley?

Check the fixed contacts, wiring and free movement of both the trolley and trigger. If the opposing contacts are heavily burnt or deformed, it is worth addressing the entire switching mechanism rather than replacing only the trolley.

Параметри

Параметри
VariantsM4
ColorBlack
Body/receiver materialABS / Plastic
Gearbox versionV2
02 // Още от сектора

Подобни продукти

Към магазина →