GUARDER WA пълнители (.45 серия) херметична гумена гарнитура
В наличност4 бр. на склад
- Доставка: [СРОК]
- Връщане: [СРОК ЗА ВРЪЩАНЕ]
Описание
GUARDER Magazine Gas Route Seal for WA .45 Series
GUARDER Airtight Rubber WA-01 is a gas route seal designed for Western Arms .45 Series gas pistol magazines. The gasket is located at the top of the magazine and contacts the nozzle during firing, allowing gas to flow from the magazine into the blowback mechanism with minimal loss. On older WA magazines, checking this part is particularly important – the rubber can harden, crack or deform over time, resulting in poorer sealing, increased gas consumption or less reliable pistol operation. WA-01 is designed for Western Arms magazine geometry and is not a replacement seal for the Tokyo Marui M1911. During installation, we recommend first cleaning the contact surface of dirt and old lubricant, lightly treating the gasket with silicone oil suitable for rubber and checking its contact with the nozzle after assembly. The seal must make good contact without creating excessive mechanical resistance.
Key Features
For Western Arms .45 Magazines
The gasket is designed for Western Arms .45 Series gas pistol magazines and matches their specific gas outlet design.
Seal Between the Magazine and Nozzle
During firing, the gasket creates a seal between the magazine gas outlet and the pistol nozzle, helping to minimize gas leakage outside the blowback system.
Replacement for an Old Seal
The GUARDER WA-01 is suitable for servicing magazines whose original gasket is hardened, cracked, worn or deformed and can no longer provide a proper seal.
Rubber Construction
The seal is made of rubber, allowing it to conform to the nozzle contact surface and create a tight connection during the operating cycle.
Specific Design for the WA System
The seal geometry matches Western Arms magazines. It is not a universal gasket for different GBB pistol systems and cannot be substituted, for example, for a Tokyo Marui M1911 version.
Technical Specifications
- Type: gas route seal / magazine sealing gasket
- Compatibility: Western Arms .45 Series GBB
- Material: rubber
- Location: gas outlet at the top of the magazine
- Manufacturer code: WA-01
Package Contents
- 1× GUARDER magazine gas route seal for WA .45 Series
Frequently Asked Questions (FAQ)
What Is the GUARDER WA-01 Gas Route Seal For?
During firing, the gasket seals the connection between the magazine gas outlet and the pistol nozzle. Proper contact minimizes gas loss and helps ensure reliable operation of the blowback mechanism.
Is the GUARDER WA-01 Compatible With Tokyo Marui M1911 Magazines?
No, this gasket is designed for the Western Arms .45 Series system. Tokyo Marui uses a different magazine design, and its M1911 / MEU / Detonics models require the corresponding seal version.
When Should the Magazine Gas Route Seal Be Replaced?
We recommend replacement if the gasket becomes hardened, cracked, deformed or visibly worn. The problem may also appear as gas leakage during firing or less reliable pistol operation, although similar symptoms can also be caused by other parts of the gas system.
How Should I Install the New Gasket?
We recommend first cleaning the contact area of old lubricant and dirt. A small amount of silicone oil suitable for rubber is sufficient on the gasket. After assembly, check that the magazine is seated correctly and that the seal contacts the nozzle properly, so the connection remains airtight without creating excessive resistance.
Параметри
| Variants | WA .45 Series |
|---|---|
| Color | Black |
Подобни продукти
НОВО4UANTUM APFG MCX GBB Series MAGNUS PRO TDC Hop-up модул
В наличност
4UANTUM MAGNUS PRO AR15 Hop-up втулка за гумичка - черен
В наличност
4UANTUM GHK / VFC AR15 MAGNUS PRO TDC Hop-Up камера - черен
В наличност
