SA Daniel Defense® MK18 (SA-E19 EDGE™ HAL ETU™) – Black
Out of stock
It cannot be ordered right now.
- Delivery: [TIME]
- Returns: [RETURN PERIOD]
Description
Specna Arms Daniel Defense® MK18 EDGE™ with programmable HAL ETU™
Daniel Defense® MK18 10.5" (SA-E19 EDGE™) by Specna Arms combines the classic look of the legendary M4 with a modern MK18 handguard and EDGE™ generation internal parts. The full-metal body with a durable Nano Coating finish and the front MK18 RIS handguard feature licensed Daniel Defense® markings and allow the installation of foregrips, weapon lights, laser modules and other accessories. The upper RIS rail on the body is designed for mounting a red dot sight or rifle scope. At the heart of the rifle is a reinforced ORION™ V2 gearbox with 8mm bearings, steel gears, a piston with a full-metal rack and high-quality air-seal components. The electronic HAL ETU™ uses the Hall effect for exceptionally precise trigger detection. The player can adjust trigger sensitivity, pre-cocking and SEMI, BINARY, BURST and AUTO modes. Accuracy is provided by a rotary hop-up unit and a precision 6.03mm inner barrel. The ESA™ system also allows quick replacement of the main spring without disassembling the gearbox. The result is a modern AEG that retains the authentic M4 appearance with an MK18 handguard while offering the features of today's electronically controlled airsoft rifles.
Key features of the Specna Arms Daniel Defense® MK18 EDGE™
Licensed M4 with Daniel Defense® MK18 handguard
The full-metal body with Nano Coating finish and MK18 handguard feature licensed Daniel Defense® MK18 markings.
HAL ETU™ unit
The advanced HAL ETU™ processor unit offers adjustment of trigger sensitivity, pre-cocking and SEMI, BINARY, BURST or AUTO modes.
ORION™ V2 gearbox
The reinforced ORION™ shell features 8mm bearings, steel gears and reinforcement in high-stress areas.
Rotary unit and 6.03mm barrel
The rotary hop-up unit together with the bucking and precision 6.03 mm barrel provides stable BB spin and a consistent flight path.
ESA™ quick spring change
The ESA™ QSC system allows the main spring to be quickly replaced without removing and disassembling the gearbox, making it easier to adjust the power to field limits.
HAL² ETU™ by Specna Arms
Introduction to the functions, settings and installation of the HAL² ETU™ electronic unit.
Technical specifications
- Manufacturer: Specna Arms
- Licence: Daniel Defense®
- Model: SA-E19 EDGE™
- Platform: M4 (MK18)
- Power source: AEG
- Material: Aluminium / steel / polymer
- Finish: Nano Coating
- Length: 700–785 mm
- Weight: 2675 g
- Outer barrel length: 10.5"
- Inner barrel length: 270 mm
- Inner barrel diameter: 6.03 mm
- Hop-up unit: Rotary
- Hop-up bucking: AEG
- Gearbox: ORION™ V2
- Bearings: 8 mm
- Processor unit: HAL ETU™
- Programmable modes: SEMI / BINARY / BURST / AUTO
- Quick spring change: ESA™
- Approximate muzzle velocity: 115 m/s (1.33 J)
- Magazine capacity: 125 BBs
- Magazine type: Mid-cap
- Connector: T-Dean
- Barrel thread: 14 mm CCW
- Blowback: No
- Compatibility with brushless motors: Yes
Package contents
- Specna Arms Daniel Defense® MK18 10.5" (SA-E19 EDGE™ HAL ETU™)
- 2× Mid-cap magazine (125 BBs)
- M90 spring
- BB speedloader
- T-Dean / Small Tamiya adapter
- Barrel cleaning rod
Recommendations and warnings
- Battery and charger are not included and must be purchased separately.
- When not in use, do not leave the battery connected to the gun.
- Before first use, the HAL ETU™ unit must be activated – see the instructions below.
Important instructions for putting the gun into operation
Before you can fire the gun, you must activate the HAL ETU and follow this procedure exactly; otherwise, the gun will not respond to the connected battery:
- Set the fire selector to Safe.
- Connect the battery and wait 3 seconds until you hear a beep.
- Press and hold the trigger for 5 seconds until you hear another beep.
- The gun is now ready for use.
Frequently asked questions from our store
What can the HAL ETU™ processor unit do?
HAL ETU™ offers 5 trigger sensitivity levels, 6 pre-cocking levels, active brake, binary trigger and programmable SEMI and AUTO modes. It also features a low-battery voltage alarm.
How do I activate the HAL ETU™ for the first time?
Before first use, set the gun to Safe, connect the battery and wait approximately 3 seconds for a beep. Then press and hold the trigger for approximately 5 seconds until you hear another beep. The unit is then ready for use.
Is the HAL ETU™ compatible with a brushless motor?
Yes. The unit is designed for use with brushless motors such as Specna Arms Dark Matter or Warhead.
What battery fits inside the stock?
The battery can be placed either directly inside the buffer tube, where a slim Buffer Stick battery is required, or the cells can also be placed inside the Crane Stock, allowing you to use a Nunchuk or Crane battery. HAL ETU™ supports 7.4V and 11.1V Li-Po batteries and the gun uses a T-Dean connector.
Specifications
| Color | Black |
|---|---|
| Muzzle velocity (m/s) | 115 (m/s) |
| Recommended weight of ammunition | 0,25g - 0,28g |
| Thread (mm) | 14- (mm) |
| Outer length MINIMAL (mm) | 700 (mm) |
| Outer length MAXIMAL (mm) | 785 (mm) |
| Inner barrel length (mm) | 270 (mm) |
| Weight (g) | 2675 (g) |
| Body/receiver material | Metal |
| Mounting System | RIS / Picatinny |
| Gearbox version | V2 - ESA™ |
| Amount of piston teeth | 14 |
| Bearings (mm) | 8 (mm) |
| Bearings (material) | Metal |
| Piston head | Plastic |
| Nozzle | Metal |
| Spring guide | Plastic |
| Hop-Up chamber material | Plastic |
| Battery type | Buffer stick |
| Connector type | T-Dean |
| Magazine material | Plastic |
| High-cap / Mid-cap | Mid-cap |
| Magazine capacity | 125 |
| Processor unit | YES |
| Battery included | NO |
| Battery Charger | NO |
| Blowback | NO |
| Weapon accessories | Yes |




