CheckpointWest
Cart0
Red Dots

OLIGHT Osight XE AMRS Enclosed Red Dot Sight, RMR Footprint – Black

Brand
OLIGHT
Item no.
OLIGHT055

In stock3 in stock

€301.55Price includes VAT.
1

  • Delivery: [TIME]
  • Returns: [RETURN PERIOD]

Description

OLIGHT Osight XE AMRS enclosed red dot sight with RMR footprint

OLIGHT Osight XE AMRS is an enclosed red dot sight (Enclosed Emitter) with the widely adopted Ruggedized Miniature Reflex (RMR) footprint. The enclosed design protects the emitter from water, dirt and other environmental factors that can interfere with the beam path in open red dot sights. The design is intended for use on full-size and compact pistols with a corresponding RMR mounting interface. Its main feature is the AMRS™ (Advanced Multi-Reticle System). Rather than simply switching between a dot and circle, the Osight XE AMRS offers a total of 5 red reticle options: 2 MOA dot, 2 MOA dot + 32 MOA circle, 6 MOA dot, 6 MOA dot + 32 MOA circle and a standalone 32 MOA circle. The shooter can therefore select a smaller dot for more precise aiming, a larger dot for faster reticle acquisition or a combination with a circle. Another distinctive feature is the CBRS™ (Collapsible Backup Rear Sight), an integrated folding backup rear sight. Pressing the release button deploys the sight from the red dot sight body, providing a mechanical backup sight for situations where the electronic reticle cannot be used. After use, the sight can be pushed back into the body until it locks in place. The Osight XE AMRS uses a 23 × 18 mm aspherical lens with a multi-layer coating. The brightness of the red reticle can be adjusted across 10 levels, including 8 for daytime use and 2 for use with night vision. One adjustment click equals 1 MOA and the elevation and windage adjustment range is ±45 MOA. Power is supplied by a CR1632 battery located in a side-loading battery compartment (battery not included). This means the red dot sight does not need to be removed from the gun and re-zeroed when replacing the battery. The stated maximum battery life reaches 105,000 hours in Mode 3 when using the standalone 2 MOA dot. The motion sensor also puts the red dot sight into sleep mode after 3 minutes of inactivity and reactivates it when movement is detected. The body is CNC-machined from 7075-T6 aircraft-grade aluminium. Measuring just 48.5 × 30.5 × 29.5 mm, the red dot sight weighs 51 g. The construction has an IPX7 waterproof rating and the manufacturer specifies an operating temperature range from -30 to 60 °C.

Key features of the OLIGHT Osight XE AMRS red dot sight

AMRS™ | 5 reticle options

The Advanced Multi-Reticle System allows you to switch between a 2 MOA dot, 2 MOA dot + 32 MOA circle, 6 MOA dot, 6 MOA dot + 32 MOA circle and a standalone 32 MOA circle.

Enclosed emitter and RMR footprint

The enclosed design protects the emitter from dirt and water. The widely adopted Ruggedized Miniature Reflex (RMR) footprint allows mounting on corresponding interfaces of full-size and compact pistols.

Folding CBRS™ backup rear sight

The integrated Collapsible Backup Rear Sight can be deployed from the red dot sight body at the press of a button. It provides a mechanical backup aiming option if the electronic reticle cannot be used.

Side-loading CR1632 battery

The CR1632 battery is replaced from the side of the red dot sight, so the optic does not need to be removed for battery replacement. The stated maximum battery life reaches 105,000 hours.

23 × 18 mm aspherical lens

According to the manufacturer, the multi-coated aspherical lens provides a distortion-free and parallax-free image. The red dot sight offers unlimited eye relief and 8 daytime + 2 NV brightness levels.

OLIGHT Osight XE AMRS red dot sight demonstration

Demonstration of the OLIGHT Osight XE AMRS enclosed red dot sight with the AMRS™ system and CBRS™ backup sight.

Operating the Osight XE AMRS red dot sight

1. Switching on and off

By default, the red dot sight is ready to activate automatically when movement is detected. It can be switched on manually by pressing the + or - button. To switch it off manually, press and hold the + and - buttons simultaneously for at least 0.5 seconds.

2. Motion sensor

The motion sensor is enabled from the factory. After 3 minutes without movement, the red dot sight enters sleep mode and reactivates when movement is detected. To change the sensor setting while the red dot sight is switched on, press the - button twice and then hold it for more than 3 seconds. One reticle flash confirms that the function has been enabled, while two flashes confirm that it has been disabled.

3. Changing the AMRS™ reticle

With the red dot sight switched on, hold the - button for more than 2 seconds. The individual reticles will begin cycling in the following order: 2 MOA dot → 2 MOA dot + 32 MOA circle → 6 MOA dot → 6 MOA dot + 32 MOA circle → 32 MOA circle. Release the button when the desired reticle is displayed. The default setting is the 2 MOA dot.

4. Brightness adjustment

Briefly press the + button to increase brightness and the - button to decrease it. A total of 10 levels are available. Levels 1 and 2 are intended for NV use, while the remaining 8 levels are intended for daytime use. When the highest or lowest level is reached, the reticle flashes once.

5. Folding CBRS™ backup rear sight

To deploy the backup rear sight, press the release button on the rear of the red dot sight. The sight will extend into its operating position. To fold it away, push it back into the body until it locks with an audible click.

6. Low battery warning

If the battery voltage drops below 2.2 V, the reticle flashes rapidly three times and the warning repeats at one-minute intervals. Replace the CR1632 battery via the side-loading battery compartment.

Technical specifications

  • Manufacturer: OLIGHT
  • Model: Osight XE AMRS
  • Type: Enclosed red dot sight (Enclosed Emitter)
  • Footprint: Ruggedized Miniature Reflex (RMR)
  • Magnification: 1×
  • Reticle colour: Red
  • Wavelength: 660 nm
  • Reticle system: AMRS™ (Advanced Multi-Reticle System)
  • Reticles: 2 MOA Dot / 2 MOA Dot + 32 MOA Circle / 6 MOA Dot / 6 MOA Dot + 32 MOA Circle / 32 MOA Circle
  • Window size: 23 × 18 mm (0.91 × 0.71")
  • Lens: Aspherical, multi-coated
  • Brightness levels: 8 daytime + 2 NV
  • Memory function: Yes
  • Motion sensor: Yes
  • Automatic sleep: After 3 minutes of inactivity with the motion sensor enabled
  • Parallax Free: Yes
  • Eye Relief: Unlimited
  • Adjustment value: 1 MOA / click
  • Elevation and windage adjustment range: ±45 MOA
  • Backup sight: CBRS™ (Collapsible Backup Rear Sight)
  • Power supply: 1× CR1632 (not included)
  • Battery replacement: Side-loading
  • Maximum battery life: Up to 105,000 hours (Mode 3, 2 MOA Dot only)
  • Material: 7075-T6 aluminium
  • Waterproof rating: IPX7
  • Operating temperature: -30 to 60 °C
  • Storage temperature: -40 to 70 °C
  • Dimensions: 48.5 × 30.5 × 29.5 mm
  • Weight: 51 g
  • M3 tightening torque: 15 in-lbs (1.7 Nm) per screw
  • 4-40 tightening torque: 15 in-lbs (1.7 Nm) per screw
  • 6-32 tightening torque: 17 in-lbs (1.9 Nm) per screw
  • 6-40 tightening torque: 17 in-lbs (1.9 Nm) per screw

ANAREUS tip: The manufacturer requires correct installation of the red dot sight using a removable medium-strength (blue) threadlocker on the supplied screws and observance of the specified tightening torque. If you are using an adapter or mounting plate, also follow its manufacturer's installation instructions.

Package contents

  • 1× OLIGHT Osight XE AMRS
  • 1× adjustment tool
  • 1× Osight XE AMRS screw set
  • 2× spare battery compartment screw
  • 1× Osight XE AMRS protective cover
  • 1× cleaning cloth
  • 1× safety notice
  • 1× user manual
  • 1× Osight sticker

Frequently asked questions from our store

What reticles does the Osight XE AMRS offer?

The AMRS™ system offers a total of 5 options: a 2 MOA dot, 2 MOA dot + 32 MOA circle, 6 MOA dot, 6 MOA dot + 32 MOA circle and a standalone 32 MOA circle. The reticle can be changed directly using the control buttons.

Do I need to remove the red dot sight to replace the battery?

No. The CR1632 battery is inserted from the side, so the red dot sight can remain mounted while the battery is replaced. This eliminates the need to remove the optic and re-zero it solely for a battery replacement. Please note that the battery is not included.

What is the CBRS™ on the rear of the red dot sight for?

CBRS™ is an integrated folding backup rear sight. It can be deployed at the press of a button and used as a mechanical backup sight in situations where the electronic reticle cannot be used.

Does the Osight XE AMRS automatically activate when moved?

Yes. With the motion sensor enabled, the red dot sight enters sleep mode after 3 minutes of inactivity and reactivates when movement is detected. The motion sensor function can also be disabled.

How do I know when the battery is nearly depleted?

When the battery voltage drops below 2.2 V, the reticle flashes rapidly three times and the warning then repeats at one-minute intervals. This indicates that the CR1632 battery should be replaced.

Specifications

Specifications
VariantsOsight XE AMRS
ColorBlack
Body/receiver materialMetal
FootprintRMR
Battery typeCR1632
Battery includedNO
02 // More from the sector

Similar products

Back to the shop →