SA MK18 10.5" Upgrade (SA-A03 ONE™ HAL² ETU™) – Black / Tan
In stock2 in stock
- Delivery: [TIME]
- Returns: [RETURN PERIOD]
Description
Specna Arms MK18 10.5" (SA-A03 ONE™ HAL² ETU™)
Specna Arms MK18 10.5" (SA-A03 ONE™ HAL² ETU™) is an electric airsoft rifle based on the compact M4 / AR15 platform. The combination of a short design, metal body and CNC-machined RIS handguard makes it a versatile AEG for CQB as well as regular outdoor airsoft games. The ONE™ series relies on a classic mechanical design without an electronic processor unit, while also offering a reinforced gearbox and above-standard internal parts. At the heart of the rifle is a reinforced V2 gearbox, which the manufacturer rates for springs up to M120. Inside you will find 18:1 steel gears, 8mm ball bearings, a reinforced polymer piston with 1 metal tooth, aluminium nozzle, aluminium cylinder head with double sealing and an aluminium piston head. The metal spring guide is fitted with a bearing. Out of the box, the rifle achieves a muzzle velocity of approximately 115 m/s. The Enter&Covert™ quick spring change system allows the rifle's power to be adjusted to the requirements of a particular field. However, with this generation of ONE™, the gearbox still has to be removed from the rifle body to access the spring guide, so changing the spring requires basic knowledge of AEG disassembly. The package also includes a weaker M90 spring suitable for reducing power, for example for CQB. BB feeding and spin are handled by an adjustable polymer rotary hop-up unit. The HAL² ETU™ electronic unit uses the Hall effect for exceptionally precise trigger detection across up to 500 positions and, via Bluetooth, allows adjustment through the Specna Link™ mobile app. The player can adjust trigger sensitivity, pre-cocking, SEMI, BINARY, BURST and AUTO modes, burst length or RoF and monitor the status of the rifle and battery. For this model, we therefore primarily recommend an 11.1V Li-Po battery, or alternatively a Li-Ion battery. Depending on the shape, a Buffer Stick, Nunchuck or Crane-type battery can be fitted inside the adjustable Crane stock. The external construction consists of a metal body with a matte finish and a CNC-machined metal RIS handguard in the MK18 style. The RIS rails allow the installation of a sight, front RIS grip, weapon light, AN/PEQ box and other accessories. The adjustable Crane stock allows the rifle length to be adapted to the player's build or equipment. The outer barrel is finished with a standard 14mm CCW thread for installing a suppressor, compensator or tracer unit.
Key features of the Specna Arms MK18 SA-A03 ONE™ HAL ETU™
Compact MK18 design
The compact AEG AR15 platform combines a short design with the distinctive CNC MK18 RIS handguard. This makes the rifle easy to handle in CQB as well as in complex outdoor environments.
Reinforced V2 gearbox
The reinforced V2 gearbox contains 8mm ball bearings, 18:1 gears and several aluminium upgrade parts. The manufacturer rates the gearbox for springs up to M120.
Enter&Covert™ spring change
The Enter&Covert™ system allows the spring to be changed according to the required power. On this version, the gearbox must be removed from the rifle body to change the spring.
CNC RIS handguard
The metal CNC RIS handguard provides space for mounting a grip, weapon light, AN/PEQ box and other tactical accessories.
HAL² ETU™ with Bluetooth
The advanced HAL² ETU™ electronic processor unit allows adjustment of trigger sensitivity, pre-cocking, RoF and SEMI, BINARY, BURST or AUTO modes via the Specna Link™ app.
HAL² ETU™ by Specna Arms
Introduction to the functions, settings and installation of the HAL² ETU™ electronic unit.
Technical specifications
- Manufacturer: Specna Arms
- Model: SA-A03 ONE™ HAL ETU™
- Platform: MK18 / AR15 (M4)
- Type: AEG
- Barrel length: 10.5"
- Muzzle velocity: approx. 115 m/s
- Body: Metal
- Handguard: CNC metal MK18 RIS
- Gearbox: Reinforced V2
- Spring change system: Enter&Covert™
- Recommended maximum gearbox spring: M120
- Bearings: 8mm ball bearings
- Gears: 18:1
- Piston: Reinforced polymer, 1 metal tooth
- Nozzle: Aluminium
- Cylinder head: Aluminium, double sealing
- Piston head: Aluminium with sealing
- Spring guide: Metal with bearing
- Hop-up unit: Polymer rotary, adjustable
- MOSFET / ETU: HAL² ETU™
- Recommended battery: 11.1V Li-Po
- Connector type: T-Dean
- Battery location: Stock
- Stock type: Adjustable Crane
- Barrel thread: 14mm CCW
- Magazine: Hi-Cap, 300 BBs
Package contents
- 1× Specna Arms MK18 10.5" AEG rifle (SA-A03 ONE™ HAL² ETU™)
- 1× Hi-Cap magazine for 300 BBs
- 1× set of folding sights
- 1× weaker M90 spring for reducing power
- 1× user manual
Recommendations and warnings
- HAL² ETU™ is not compatible with brushless / BLDC motors. Therefore, do not install a brushless motor in the rifle. Its use with this electronic unit is not supported by the manufacturer and may cause the setup to malfunction.
- Battery and charger are not included and must be purchased separately.
- Whenever changing the spring, always check the resulting muzzle energy/velocity with a chronograph and comply with the limits of the specific field or event.
- When not in use, do not leave the battery connected to the rifle.
- Before first use, the HAL² ETU™ unit must be calibrated.
Important instructions for putting the rifle into operation
Before you can fire the rifle, you must activate the HAL² ETU™ unit and follow this procedure exactly, otherwise the rifle will not respond to the connected battery:
- Set the fire selector to Safe.
- Connect the battery and wait 3 seconds until you hear a beep.
- Press and hold the trigger for 5 seconds until you hear another beep.
- The rifle is now ready for use.
Frequently asked questions from our store
Which battery do we recommend for the Specna Arms SA-A03 ONE™?
Due to the classic mechanical contacts without a MOSFET, we primarily recommend a 7.4V Li-Po battery, or alternatively NiMH. Depending on the dimensions, a Buffer Stick, Nunchuck or Crane battery can be used in the Crane stock.
Does this rifle have a MOSFET or ETU?
Yes. The ONE™ Upgrade series in this configuration uses the HAL² ETU™ electronic unit with Bluetooth, so it can be controlled via the Specna Link™ mobile app.
Can a brushless motor be installed in the rifle?
No. HAL² ETU™ does not support brushless / BLDC motors. If you plan to replace the motor, use a compatible conventional brushed AEG motor.
What can be configured via the Specna Link™ app?
Via Bluetooth, you can configure features such as trigger sensitivity, pre-cocking, RoF, firing modes and burst length. The app also allows you to save profiles, monitor battery status and display operating and telemetry data from the rifle.
Is it easy to change the spring in the SA-A03 ONE™?
The rifle uses the Enter&Covert™ system, but unlike newer systems with access through the buffer tube, the gearbox must be removed from the rifle body to change the spring. The replacement therefore requires basic knowledge of AEG disassembly.
If I wanted to upgrade the rifle, where should I start?
The rifle is powerful enough for regular gameplay in its standard configuration thanks to its CNC compression parts, but if you want to improve trigger response, we recommend installing an ETU unit, or at least a MOSFET and an 11.1V battery. A higher rate of fire would also require a piston with a full-metal rack. For improved accuracy, you can install a CNC hop-up unit with TDC pressure, such as MAXX or RetroArms, together with Maple Leaf or 4UAD buckings.
Specifications
| Color | Half - Tan |
|---|---|
| Muzzle velocity (m/s) | 115 (m/s) |
| Recommended weight of ammunition | 0,25g - 0,28g |
| Thread (mm) | 14- (mm) |
| Outer length MINIMAL (mm) | 695 (mm) |
| Outer length MAXIMAL (mm) | 780 (mm) |
| Inner barrel length (mm) | 275 (mm) |
| Weight (g) | 2580 (g) |
| Body/receiver material | Metal |
| Mounting System | RIS / Picatinny |
| Gearbox version | V2 - ESA™ |
| Amount of piston teeth | 1 |
| Bearings (mm) | 8 (mm) |
| Bearings (material) | Metal |
| Piston head | Metal |
| Nozzle | Metal |
| Spring guide | Metal |
| Hop-Up chamber material | Plastic |
| Battery type | Buffer stick |
| Connector type | T-Dean |
| Magazine material | Metal |
| High-cap / Mid-cap | High-cap |
| Magazine capacity | 300 |
| Processor unit | YES |
| Battery included | NO |
| Battery Charger | NO |
| Blowback | NO |
| Weapon accessories | Yes |




