CheckpointWest
Cart0
Battery 7.4V

Gens ACE G-Tech Smart Li-Pol Battery 7.4V / 300 mAh, 35C (JST) – HPA

Item no.
GEA3002S35JGT

In stock11 in stock

€8.35Price includes VAT.
1

  • Delivery: [TIME]
  • Returns: [RETURN PERIOD]

Description

Gens ACE G-Tech Smart Li-Po battery 7.4V for PolarStar or GATE Pulsar HPA Engines

Gens ACE is one of the proven battery manufacturers across airsoft, RC models and the FPV world. This 7.4V Li-Po battery is designed to power HPA Engine systems with a JST connector, such as the PolarStar F2™ or GATE Pulsar Series, as well as complete HPA guns such as the EPeS Admiral or Delta Armory HPA and others. Compared with older NiMH batteries, it offers higher efficiency and more stable performance, while also being smaller than Li-Ion batteries, so it can be easily placed directly inside the gun without the need for a battery PEQ box or battery pouch. This helps maintain a clean gun setup, something every Mil-Sim player will appreciate. The battery uses a JST connector for connection to the gun and a special G-Tech Smart balance / charging connector for automatic charging setup immediately after connection. The main difference is the presence of a smart ID chip and one additional data pin, which form the Gens ACE G-Smart ecosystem. Another advantage is that it can also be charged using conventional Li-Po chargers for standard balance connectors.

Key features

G-Tech Smart charging

Thanks to the smart G-Tech Smart chip, the battery can transmit important information such as the number of cells, recommended charging current or its current status. A compatible charger can therefore recognise the connected battery and automatically set the correct charging parameters without the need to enter values manually.

HPA micro cell configuration

The slim profile is suitable for pistol grips of HPA guns and other confined spaces, helping to maintain a clean MilSim appearance without a bulky external battery.

High-quality Gens ACE cells

Gens ACE cells provide stable performance and long service life even with regular use. G-Tech Smart charging also helps set the correct charging parameters according to the data stored in the battery.

JST connector for HPA FCU

The compact JST connector is typical of modern HPA FCU systems and, thanks to its small size, is also suitable for spaces where larger connectors will not fit.

For HPA guns

Suitable for HPA rifles, SMGs, machine guns and DMR platforms equipped with a compatible JST connector.

G-Tech Smart connector and charging

Introduction to the G-Tech Smart connector and charging demonstration.

How to charge a Li-Po battery with a G-Tech Smart connector

A Li-Po battery with a G-Tech Smart connector can be charged in two ways. With a compatible G-Tech Smart charger, the battery parameters are recognised automatically. When using a conventional universal Li-Po charger, the correct battery type, number of cells and charging current must be set manually.

A) Charging with a G-Tech Smart charger (e.g. iMars mini / D300)

A G-Tech Smart charger automatically recognises the battery parameters using the integrated chip. There is therefore no need to manually set the battery type, number of cells or charging current.

  1. Connect the main power connector: Connect the battery's black connector (JST-SYP) to the corresponding charger port. If necessary, use a compatible adapter supplied with the charger.
  2. Connect the G-Tech Smart balance connector: Plug the black balance connector into the designated G-Tech port on the charger. The connector can only be inserted correctly in one orientation.
  3. Wait for automatic detection: The charger reads the information stored in the battery chip and displays its parameters, such as LiPo, 2S, 300 mAh.
  4. Start charging: The charger automatically sets the appropriate charging parameters. For a 300 mAh battery, a current of 0.3 A is typically used. Depending on the charger type, confirm the start of charging or the process may start automatically.
  5. Wait for charging to finish: The charger indicates a full charge with an audible signal, indicator light or Full / Charge Done message. Then disconnect the battery.

B) Charging with a conventional universal Li-Po charger (e.g. SkyRC iMax B6)

A conventional Li-Po charger cannot read data from the G-Tech Smart chip. You must therefore set the battery parameters manually and carefully check them before charging.

  1. Connect the battery: Connect the main power connector (JST-SYP) to the charger output using a suitable charging cable. Connect the G-Tech balance connector to the 3-pin 2S balance port directly on the charger or balance board.
  2. Select the battery type: Select the LiPo BATT program in the charger menu.
  3. Select balance charging: Set the LiPo BALANCE mode, which balances the voltage of the individual cells during charging.
  4. Set the charging current: For a battery with a capacity of 300 mAh, set the current to 0.3 A, corresponding to a 1C charge rate. The stated maximum charging current is 0.6 A.
  5. Set the number of cells: For a 2-cell battery, set 7.4 V (2S).
  6. Start charging: Hold the ENTER / START button for approximately 3 seconds.
  7. Check cell detection: The charger will check the battery. Before confirming, verify that the detected number of cells matches the selected value, for example R: 2SER / S: 2SER. Only then confirm charging.
  8. Wait for charging to finish: A fully charged 2S Li-Po battery reaches a total voltage of 8.40 V, i.e. a maximum of 4.20 V per cell. Once charging is complete and the charger indicates completion, disconnect the battery.

Warning: Before charging, always check the correct battery type, number of cells, connector polarity and selected charging current. Never charge a Li-Po battery unattended and always use a charger designed for Li-Po batteries.

Technical specifications

  • Configuration: HPA micro
  • Type: Li-Po
  • Voltage: 7.4 V
  • Capacity: 300 mAh
  • Discharge rate: 35C
  • Dimensions: 42 × 16 × 12 mm
  • Weight: 19 g
  • Cable length: 65 mm (G-Tech Smart) / 100 mm (JST)
  • Connector: JST
  • Balance connector: G-Tech Smart
  • G-Tech Smart charging: Yes
  • Can be charged with standard Li-Po chargers: Yes (the G-Tech Smart balance connector is connected like a standard balance connector)
  • Designed for: HPA guns with an HPA Engine JST connector (PolarStar, GATE Pulsar and others)

Maintenance, charging and storage instructions

  • Fully charge the battery at a lower current before first use.
  • Only charge using a charger designed for Li-Po batteries.
  • Ideally, use a protective charging bag.
  • Do not leave the battery completely discharged – this may damage it.
  • For long-term storage, keep the capacity at around 70–75%.
  • Store in a dry place away from direct sunlight and high temperatures.
  • A drop in rate of fire or trigger response is a signal that the battery needs recharging.
  • You can find a detailed manual for G-Tech Smart batteries in the Download section.

Package contents

  • Gens ACE G-Tech Smart Li-Po battery 7.4V / 300 mAh (35C)

Frequently asked questions from our store (FAQ)

What is G-Tech Smart and how does it differ from a standard Li-Po battery?

G-Tech Smart is Gens ACE's smart battery charging system. The battery contains an ID chip and data pin that allow a compatible G-Tech Smart charger to recognise the connected battery and automatically set the appropriate charging parameters. The battery itself is still a conventional Li-Po battery; G-Tech Smart simply makes correct charging easier and more automated.

Do I need to buy a special charger for a G-Tech Smart battery?

No. G-Tech Smart is designed with backwards compatibility. The easiest option is to use a compatible G-Tech Smart charger, which reads the information from the chip and sets the charging parameters automatically. However, the battery can also be charged using a conventional balance Li-Po charger, provided it supports the appropriate number of cells and allows the power and balance connectors to be connected correctly.

What happens if I connect a G-Tech Smart battery to a conventional Li-Po charger?

When connected correctly, the battery will behave like a standard Li-Po battery. However, a conventional charger cannot use the data stored in the G-Tech Smart chip, so you must manually set the battery type, number of cells and charging current. Use the LiPo BALANCE mode for charging.

How should I store a Li-Po battery?

A Li-Po battery should not be stored fully charged or completely discharged for long periods. For longer-term storage, use the STORAGE mode on a compatible charger, which sets the cells to a suitable storage voltage. Store the battery in a dry place away from direct sunlight, heat sources and flammable materials.

Can I use a G-Tech Smart battery in the same way as a standard Li-Po battery?

Yes. G-Tech Smart does not change the principle of powering the gun or device. The key factors for use are the correct voltage, number of cells, dimensions, capacity, discharge rate and compatible power connector. The Smart function is primarily used when charging with a compatible G-Tech Smart charger.

Which HPA systems is this battery suitable for?

Primarily for PolarStar, GATE Pulsar, Wolverine and other HPA Engines that use a JST connector. Thanks to its 7.4 V voltage, it is ideal for control units (FCUs), where high power like that required by an AEG is not necessary, with stability and reliability being the main priorities.

Specifications

Specifications
VariantsG-Tech Smart
ColorBlack
Length42 × 16 × 12 (mm)
Battery typeHPA Micro
Connector typeJST
Battery includedYES
Battery ChargerNO
02 // More from the sector

Similar products

Back to the shop →