CheckpointWest
Cart0
Gearbox shells

RetroArms CNC V2.5 / SR-25 QSC Split Gearbox (8 mm)

Item no.
7213

In stock1 in stock

€167.34Price includes VAT.
1

That is all we have in stock.

  • Delivery: [TIME]
  • Returns: [RETURN PERIOD]

Description

RetroArms CNC split SR-25 QSC gearbox

RetroArms SR-25 CNC gearbox is an extended version of the V2 design known as V2.5, intended for AEG airsoft rifles based on the SR-25 platform. Both halves are fully CNC-milled from a solid block of EN AW 7075 T651 aluminium alloy rather than cast, and fit together precisely, including coaxially aligned holes for 8 mm bearings. The redesigned generation features thinner outer walls for improved fit inside SR-25 receivers, a modified front section for compatibility with a wider selection of hop-up units and smaller cylinder head locating posts for improved compatibility with parts from different manufacturers. Servicing and tuning are made easier by inspection openings for AOE and piston position, gear lubrication holes and access for releasing the anti-reversal latch. The trigger contact area has also been modified, including the removal of problematic radii for the installation of ETU units, while the centre pin opening has been enlarged for improved fit in certain non-standard receivers. Wiring can be routed through an opening beneath the motor post, where it is protected by a machined tab. The design also uses new formed threads, high-strength socket head cap screws, additional machine-chamfered edges and air intake openings for the pneumatic system. Precision holes for the anti-reversal latch and trigger, together with micro-grooves on the spring posts, help keep small components in place while assembling the gearbox. The integrated QSC system enables quick spring changes, and the assembly includes the corresponding CNC spring guide. The manufacturer states that the gearbox has undergone long-term testing with an M160 spring. The gearbox can be used in most compatible SR-25 rifles, but due to differences in manufacturing tolerances, not every combination of receiver and internal components can be considered Plug & Play. The manufacturer does not recommend this version for Classic Army guns, and installation itself requires experience with building and tuning AEG gearboxes.

Key features

CNC-milled EN AW 7075 T651 aluminium alloy

Both gearbox halves are machined from a solid block of EN AW 7075 T651 aluminium alloy. The result is a precise construction with coaxially aligned bearing holes and high durability of the mechanically stressed gearbox shell.

QSC quick spring change

The integrated QSC system allows the spring to be replaced without completely disassembling the gearbox. The corresponding CNC spring guide is also included.

Improved SR-25 compatibility

Thinner walls, an enlarged centre pin opening, modified cylinder head locating posts and a redesigned front section make it easier to fit the gearbox and use a wider range of compatible components.

Inspection and service openings

Inspection openings for AOE and piston position make tuning the assembly easier. Gear lubrication holes and an opening for releasing the anti-reversal latch are also included.

Improved cable routing

A pass-through opening beneath the motor post and a machined protective tab provide more space for correct cable routing and help keep the wiring away from areas where it could be subjected to unwanted mechanical stress.

Technical specifications

  • Type: Split CNC gearbox V2.5 / SR-25
  • Material: EN AW 7075 T651 aluminium alloy
  • Manufacturing: CNC milling from a solid block of material
  • Bearing hole diameter: 8 mm
  • Spring change system: QSC
  • Spring guide: CNC, included
  • Assembly screws: High-strength socket head cap screws
  • Bearings: Not included
  • Manufacturer testing: Long-term tested with an M160 spring
  • Compatibility: Most SR-25-type AEG airsoft guns
  • Compatibility limitation: Manufacturer does not recommend it for Classic Army guns

Package contents

  • 1× RetroArms CNC split gearbox V2.5 / SR-25 (8 mm) QSC
  • 1× CNC spring guide
  • 2× M2.5 × 3 screw
  • Assembly hardware
  • 1× RetroArms sticker

Frequently asked questions (FAQ)

Is this gearbox the same as a standard V2 gearbox for an M4?

No. This is an extended V2.5 design intended for the SR-25 platform. Before purchasing, it is therefore necessary to verify that the specific gun uses the corresponding SR-25 gearbox type.

Does the gearbox fit every SR-25 airsoft rifle?

RetroArms has modified the design for compatibility with the vast majority of common SR-25 rifles, but different manufacturing tolerances between brands may require additional fitting. The manufacturer also does not recommend this version for Classic Army guns.

Are 8 mm bearings included?

No. The gearbox has holes for 8 mm bearings, but the bearings themselves are not included. They therefore need to be selected separately according to the planned build.

Is the RetroArms SR-25 CNC gearbox a Plug & Play part?

No. Although the design is engineered for broad compatibility, installation requires expert knowledge of AEG gearbox assembly. The gears, piston, pneumatic system, wiring, hop-up system and other components of the specific gun must be correctly fitted and tuned to work together.

Specifications

Specifications
VariantsSR-25
ColorBlack
Body/receiver materialMetal
Gearbox versionV2.5 - QSC
Bearings (mm)8 (mm)
Spring guideMetal
02 // More from the sector

Similar products

Back to the shop →