CheckpointWest
Cart0
Standard

GUARDER AEG Aluminum Ventilation Piston Head

Brand
GUARDER
Item no.
GUARD002

In stock3 in stock

€13.84Price includes VAT.
1

  • Delivery: [TIME]
  • Returns: [RETURN PERIOD]

Description

GUARDER Piston Head With Ball Bearing

GUARDER piston head with ball bearing is an upgrade component for AEG air seal systems, made from 6061 aluminum alloy, which offers a good balance of strength and low weight. The design incorporates an axial ball bearing on the spring side. During compression, it allows the spring to rotate naturally, helping to reduce torsional stress and spring wear during the gearbox operating cycle. The metal construction also provides a sturdy base for the piston assembly. During installation, we recommend checking not only that the piston head is properly tightened, but also that the bearing rotates freely, the O-ring seals correctly inside the cylinder, the AOE is properly set and the overall weight of the piston assembly is appropriate. In practice, the interaction of these parameters is more important than the piston head material alone.

Key Features

6061 Aluminum Alloy

The piston head is made from 6061 aluminum alloy, combining the required mechanical durability with relatively low weight.

Integrated Ball Bearing

The piston head features an axial ball bearing that allows the spring to rotate more naturally during compression.

Reduced Torsional Stress on the Spring

Allowing the spring to rotate helps reduce twisting during compression, thereby reducing unwanted stress during repeated operating cycles.

Sturdy Piston Assembly Construction

The metal design provides a sturdy base for the front section of the piston assembly and is intended for users who prefer an aluminum piston head for their upgrade.

For AEG Service and Upgrades

The piston head is suitable for AEG air seal system repairs and upgrades where a combination of aluminum construction and a spring bearing is required.

Technical Specifications

  • Type: piston head for AEG
  • Material: 6061 aluminum alloy
  • Bearing: axial ball bearing
  • Bearing function: allows the spring to rotate during compression
  • Use: AEG air seal system service / upgrade

Package Contents

  • 1× GUARDER piston head with ball bearing

Frequently Asked Questions (FAQ)

What Is the Purpose of the Ball Bearing in the Piston Head?

The bearing allows the spring to rotate more freely during compression. This helps reduce twisting and torsional stress during the gearbox operating cycle.

What Material Is the Piston Head Made From?

The piston head is made from 6061 aluminum alloy, which offers a suitable combination of strength and low weight for an AEG piston assembly.

What Should Be Checked During Installation?

During installation, we recommend checking the correct fastening of the piston head, free movement of the bearing, O-ring seal inside the cylinder and AOE adjustment. After assembly, the piston must also move freely along the gearbox guide rails.

Is an Aluminum Piston Head Always Better Than a Plastic One?

Not necessarily. An aluminum piston head offers a sturdy construction, but when building a gearbox, the weight of the entire piston assembly, desired RoF, spring strength and other components must also be considered. The appropriate choice therefore depends on the specific AEG configuration.

Specifications

Specifications
ColorSilver
Piston headMetal
02 // More from the sector

Similar products

Back to the shop →